- Joined
- Apr 24, 2004
- Messages
- 1
- First name
- john baker
-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
tractor purchase looming
- Thread starter holler_hooter
- Start date
- Joined
- Jul 7, 2003
- Messages
- 68
- First name
- ZJ
Special consideration? ???
Consider New Holland!
Consider New Holland!
- Joined
- Jul 7, 2003
- Messages
- 68
- First name
- ZJ
Special consideration? ???
Consider New Holland!
Mean, look other post
Consider New Holland!
Mean, look other post
- Joined
- Jul 5, 2003
- Messages
- 4,064
- Location
- Laag Zuthem
- First name
- Renze
- Machinery:
- 1976 5718
1978 5718 35kmh: Work in progress
1967 3011
Make sure that new master brake&clutch Cylinders are fitted (Fragokov instead of the older PAL ones), there's no play on the water pump bearings, the shifting lever isn't worn out, the rubber fuel hoses arent leaking, and that the piston rings are sealing.
To replace mentioned parts, totals about 500 Euro.
For the piston rings on the older ones, just letting them work hard will seat them.
Ours was never used and used a liter of oil per day, when we got it at 3700 hrs. When it is doing the work of a 80 hp tractor, the rings will seat, and oil consumption will drop to allmost zero, at 5100 hrs.
These tractors realy need to work to keep in good condition, or they will use lots of oil. With this 3 tonne 4wd body, it is usually not hard to get that little 3 pot to work...
To replace mentioned parts, totals about 500 Euro.
For the piston rings on the older ones, just letting them work hard will seat them.
Ours was never used and used a liter of oil per day, when we got it at 3700 hrs. When it is doing the work of a 80 hp tractor, the rings will seat, and oil consumption will drop to allmost zero, at 5100 hrs.
These tractors realy need to work to keep in good condition, or they will use lots of oil. With this 3 tonne 4wd body, it is usually not hard to get that little 3 pot to work...
Similar threads
