• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by tha_ulsterscot

  1. 3045 steering box

    3045 steering box

    My 3045 has only one steering arm, and I have two sets of bushes for the centre pin, supplied by Zetor agents which are too big, yet they say you can't get any smaller ones. ITs a 1968 tractor.
  2. 3045 steering box

    3045 steering box

    HI there, I've just restore the above tractor but I still have too much play in the steering box. I've been told that a box from a later model will fit on. It has roller bearings instead of the block system in mine Can anyone tell me what tractor this comes off as I'd like to fit one. Thanks Paddy.
  3. 3045 Gold Paint.?

    3045 Gold Paint.?

    I now have the tractor painted (with Sparex Paint ) . It is still in bits to be rebuilt, but I have taken a lot of pics as I went along. Can photographs be posted on this forum ? If so I would post them to let others see the progress. OH and how can I do this?
  4. 9641 PTO.

    9641 PTO.

    I eventually figured out a solution to the PTO problem. I put the PTO into ground drive, move the tractor forward a few feet to start the mower turning and then change to normal PTO drive and engage it while the mower is free wheeling. The engine takes up the drive and there is no shockto the...
  5. 3045 Gold Paint.?

    3045 Gold Paint.?

    Thanks Renze, will try them.
  6. 3045 Gold Paint.?

    3045 Gold Paint.?

    Starting to restore the above tractor and want to get the proper colour. Some I've seen painted are more like Massey Gold, where as mine is more a Gold/Green colour. Is there a paint number as such for this colour? Or where can the right paint be bought? I'm in Northern Ireland by the way.
  7. 9641 PTO.

    9641 PTO.

    My 9641 PTO. goes into gear very sharply when you push the switch. Can anyone tell me if it is possible to adjust the speed at which it starts to turn, or in other words take up the drive more gently.
  8. Spool Valves ?

    Spool Valves ?

    Well boys, I'm in trouble as usual, I have bought an old flail hedgecutter, which uses the spools of the 9641. My problem is that the cable controlled valves are very stiff, making it hard to make smooth movements. Is there any way to adjust the cables so that they move easier? Any help...
  9. 9641 starter solenoid

    9641 starter solenoid

    Thanks Renz, got one from main agent, was only 36 so juet bought it .
  10. tractor rally in aid of cancer appeal ....the pit falls ..

    tractor rally in aid of cancer appeal ....the pit falls ..

    There's a lot of road runs this side of the water, and as long as the driver signs a form stating that the machine is insured, thats it. Of course we also have to apply to the Parades commision for permission, ( this being N Ireland) . We had a run in with customs & excise a few years ago, about...
  11. 9641 starter solenoid

    9641 starter solenoid

    What make is the starter on my 9641? would the solenoid have to be purchased from the main agent, or are they a cmmon make which can be got anywhere?
  12. 3045 pto-Hyds.

    3045 pto-Hyds.

    Still finding my way around the 3045, so a couple of questions. The PTO lever has 3 positions, but the hyds only seem to work when the PTO is turning, are they all like this or should the lift work without the shaft turning? Also need a rim to hold a lens into one of the front lights, can...
  13. another 3045 question

    another 3045 question

    Well, I managed to get the hydraulics working again, with the help of a rubber hammer >:-) I think it was just a stuck valve. the tractor has been in storage for 6 + yrs. She lifted a 4 furrow Kneverland plough and held it up even with the engine stopped :D Still havn't got to use her yet though.
  14. Intermittent Hydraulics, on 3045

    Intermittent Hydraulics, on 3045

    The hyds on the 3045 are not lifting the link arms, the trailer tipping lever is pressurising (engine revs drop while lever is pulled), but the draft/position lever does nothing. PTO shaft is running ??? Just changed the oil in the back end, and put in EP 90. took the seat off tonite, and...
  15. another 3045 question

    another 3045 question

    Thanks Renze, will let you know how I get on, after I get the old girl working.
See more
Back
Top Bottom