• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by eoghan_nevin

  1. 6211 Compressor

    6211 Compressor

    Anyone know a website where I can find weld on ball ends for a 6211, looking for lower links and some ball ends that end up in circular end ( replacing the right and left hand lift rod assembly round ball ends ) For example...
  2. 6211 Compressor

    6211 Compressor

    Do I have to drain the oil to change filters ? What magnetic one?
  3. 6211 Compressor

    6211 Compressor

    Level I lift is on the left and level I push in on the right Is this the hydraulic filter for a 6211, hard to find one in Ireland that says 6211. ZETOR 7045 HYDRAULIC FILTER - https://www.johnconaty.com/70114566-FFH9313-p/5731.htm Also as it's a paper replacement one I'd assume its much the...
  4. 6211 Compressor

    6211 Compressor

    Tried that , but doesn't feel like it clicks in, feels like it keeps rubbing up against the gears. Does the engage level move much from disengage to engage positions, maybe it's engaging but the compressor doesn't work. Any ideas ? Thanks
  5. 6211 Compressor

    6211 Compressor

    Anyone have any ideas for a compressor that doesn't work. I pulled up locking pin and try to put in engage/disengage pin. Should I feel a click - ( I feel more of grinding ( I know I should feel a slight grind ) but should it feel like it clicks into position. Any simple fixes/known problems...
  6. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Thanks wasn't sure. Don't have a need for that so middle will do. Thanks
  7. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Thanks, that's a great help Took off and cleaned the oil filter when I replaced oil today. Question - on the transmission oil dipstick under gear level, there are 3 notches on the stick. Low middle and high , between low and middle there are like scratched / notches. What do the 3 levels mean...
  8. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Thanks. Are them marks to be lined up when outing back the filter (say in vice ) or when I'm putting it back onto tractor Is there a O Ring I have to watch out for ( when I bolt it back onto tractor )
  9. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Yeah I am. Okay I will, do I need to fill the filter with oil again , also do I need to bleed it. So open top but on hosting and he filter drops down is it? Then put in vice and separate the filter from another outer housing is it ? Is there many different pieces inside the filter. Thanks
  10. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Yeah if you don't mind.
  11. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Where is the oil filter on the 6211, is it on the right side of tractor as you sit on seat in can? Also can you attach a picture of the filter needed to replace it or a website on Ireland that stocks it? Last thing is there much difference to changing oil filter than changing fuel filter ( as I...
  12. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Yeah strange alright, gauge has 12V at it so there's an earth there. And when you said earlier doesn't need earth I figured that was right as there's no "proper place for an earth to attach" but needle drops back to zero if temp earth was disconnected but hey it's working 👍👍 If the engine oil...
  13. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    That's great, just said I'd make sure. Thanks Fitted new thermostat and it's reading perfect on gauge. Gradually moves all the way up to just shy of 80C (ie the edge of green ) . Did notice that although there is only 1 cable going from thermostat housing to gauge (ie sendor cable) it didn't...
  14. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Sorry I don't understand. There's a pipe ( I'll call it pipe 1 ) coming in on left of the housing and goes through filter 1 and into filter 2 then out on pipe with banjo ( I'd assume to injector ) There's arrows on filter housing showing fuel goes from left to right ( ie in pipe 1 accross two...
  15. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Thanks. Fuel in filter 1 filter 2 fuel out. Surely fuel filter 1 is primary and 2 is secondary altogether two is on the nearer side of the fuel tank. Fuel hardly goes into secondary (fine ) filter first then coarse filter ?
See more
Back
Top Bottom