• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. 6211 Compressor

    6211 Compressor

    Anyone know a website where I can find weld on ball ends for a 6211, looking for lower links and some ball ends that end up in circular end ( replacing the right and left hand lift rod assembly round ball ends ) For example...
  2. 6211 Compressor

    6211 Compressor

    Do I have to drain the oil to change filters ? What magnetic one?
  3. 6211 Compressor

    6211 Compressor

    Level I lift is on the left and level I push in on the right Is this the hydraulic filter for a 6211, hard to find one in Ireland that says 6211. ZETOR 7045 HYDRAULIC FILTER - https://www.johnconaty.com/70114566-FFH9313-p/5731.htm Also as it's a paper replacement one I'd assume its much the...
  4. 6211 Compressor

    6211 Compressor

    Tried that , but doesn't feel like it clicks in, feels like it keeps rubbing up against the gears. Does the engage level move much from disengage to engage positions, maybe it's engaging but the compressor doesn't work. Any ideas ? Thanks
  5. 6211 Compressor

    6211 Compressor

    Anyone have any ideas for a compressor that doesn't work. I pulled up locking pin and try to put in engage/disengage pin. Should I feel a click - ( I feel more of grinding ( I know I should feel a slight grind ) but should it feel like it clicks into position. Any simple fixes/known problems...
  6. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Thanks wasn't sure. Don't have a need for that so middle will do. Thanks
  7. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Thanks, that's a great help Took off and cleaned the oil filter when I replaced oil today. Question - on the transmission oil dipstick under gear level, there are 3 notches on the stick. Low middle and high , between low and middle there are like scratched / notches. What do the 3 levels mean...
  8. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Thanks. Are them marks to be lined up when outing back the filter (say in vice ) or when I'm putting it back onto tractor Is there a O Ring I have to watch out for ( when I bolt it back onto tractor )
  9. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Yeah I am. Okay I will, do I need to fill the filter with oil again , also do I need to bleed it. So open top but on hosting and he filter drops down is it? Then put in vice and separate the filter from another outer housing is it ? Is there many different pieces inside the filter. Thanks
  10. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Yeah if you don't mind.
  11. Oil Filter - Zetor 6211

    question Oil Filter - Zetor 6211

    Where is the oil filter on the 6211, is it on the right side of tractor as you sit on seat in can? Also can you attach a picture of the filter needed to replace it or a website on Ireland that stocks it? Last thing is there much difference to changing oil filter than changing fuel filter ( as I...
  12. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Yeah strange alright, gauge has 12V at it so there's an earth there. And when you said earlier doesn't need earth I figured that was right as there's no "proper place for an earth to attach" but needle drops back to zero if temp earth was disconnected but hey it's working 👍👍 If the engine oil...
  13. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    That's great, just said I'd make sure. Thanks Fitted new thermostat and it's reading perfect on gauge. Gradually moves all the way up to just shy of 80C (ie the edge of green ) . Did notice that although there is only 1 cable going from thermostat housing to gauge (ie sendor cable) it didn't...
  14. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Sorry I don't understand. There's a pipe ( I'll call it pipe 1 ) coming in on left of the housing and goes through filter 1 and into filter 2 then out on pipe with banjo ( I'd assume to injector ) There's arrows on filter housing showing fuel goes from left to right ( ie in pipe 1 accross two...
  15. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Thanks. Fuel in filter 1 filter 2 fuel out. Surely fuel filter 1 is primary and 2 is secondary altogether two is on the nearer side of the fuel tank. Fuel hardly goes into secondary (fine ) filter first then coarse filter ?
  16. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Thanks diy-farmer. Changed over the fuel filters there, was very easy after your tips - thanks diy farmer. Will get round to thermostat soon !
  17. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Have ordered stuff of malpasonline few days ago but they didn't have gasket in stock so I'll make one myself with the paper I have and use gasket silicone. Thanks that'll help me a lot, where is the tap to turn off diesel, ( near filter ?) I only leave the 2nd filter hand tight until I pump the...
  18. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Hopefully but I might use the gasket paper and make one and use gasket silicone I have ( listed for use for water pumps and thermostat housings). That should hold wouldn't you think - can't see anything special about the thermostat gasket that's can be got...
  19. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Sorry my fault meant to say the don't have the gasket online . I'm getting that exact thermostat from there but it doesn't come with the thermostat gasket. So can I make my own etc ( see last message re gasket and fuel filters ) thanks
  20. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Ordered a thermostat but they don't have the thermostat online. I have brown gasket paper , can I make up my own . Will it hold or is there anything special about the proper one. Seems just paper in the pictures ! Sidejob, replacing the fuel filter in the 6211. Seen there's a primary and...
  21. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Thanks for the help. Ill hopefully get a chance to put in the thermostat this week.
  22. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Yeah but I tested sensor ( detailed this in a previous message ) which seems fine. That leads me to say it's the thermostat
  23. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    When I push down key the dial moves ever so much but still doesn't even read the lowest notch on dial and doesn't move at all when tractor is going and warming up
  24. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Thanks I'll swap out the thermostat so, here's hoping the bolts don't shear. Any ideas on the earthing of the housing ? Thanks Eoghan
  25. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    No gauge is always on zero ie on the left - so it must be stuck open ( going by previous sensor test discussed there right )? The heat in the cab does blow slightly warm air most of the time . So to me is the thermostat. Would I be right in saying there's a good chance replacing it will make...
  26. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Ok thanks I'm currently trying to source a thermostat and gasket and I'll change it . Is it possible to check the thermostat while it is in thermostat housing.
  27. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    How do I check the thermostat when I have it out though ? Mine has 4 bolts and a gasket between them. Is the thermostat screwed or held in with clips when the housing is opened. Is there a certain way to put them in ?
  28. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    As I think it is Thermostat, is it hard to change out. I know the 4 bolts on housing and separate them and replace gasket when all done but is the thermostat held in or awkward to install ? Really appreciate all the help Eoghan
  29. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Ok so tried out a few things. Firstly think the sensor wasn't getting an earth. So put an temporary earth on it. Took out thermostat housing ( removed 3 houses ). Then took out sensor and checed it - seems fine. Then began to test resistance of sensor . Dipped sensor into tap water ( simulate...
  30. Zetor 6211 - Coolant Temperature Gauge

    Zetor 6211 - Coolant Temperature Gauge

    Thanks, yeah mine is same , screwed up in to thermostat housing. I have one cable going to gauge but I don't have another connection to po it an earth on it ( maybe it broke ) . Only thing holding it is 3 houses so not connected to any ground I think. I'll check it out and get back to ye. Thanks
Back
Top Bottom