• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by bristol

  1. Replacing 8011 hydraulic pump

    Replacing 8011 hydraulic pump

    I have finally gone ahead a change the hydroulic pump! What a difference! Before changing it, I had 500 psi while ideling,now I get over 1000 psi while ideling. PTO no longer acts wierd too. If I could have done it, everybody can too!:)
  2. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    I don't ever have to use the hand break since my property has hardly a pump! The linkage seems to be ok . I may have to wait till spring to see if the problem persists in warmer temp. Thank you
  3. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    Thank you, Mike If that is the cause, I will be on the mission to replace the cylinder once the weather permits here in Canada. The same wheel has oil leakage from axel seal. Could that be what started the problem on the first place? Thank you
  4. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    Today in -20 degree C, I took me 10 minutes to make it move. Tried forward and backward gears many times. I was able to make a U turn without having the right rear wheel turned a bit! Never used the difrencial lock or .... what could be the cause? Thank you
  5. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    The colder it gets, the harder it is to make my tractor right rear wheel turning. Any idea why? Water in the real axel reservior? Break reservoir? Any help appreciated. Thank you
  6. Fuelsystem issues 8011

    Fuelsystem issues 8011

    Hi, I also had hard time bleeding the fuel line after changing filters using the bleeding screws! I ended up using a break bleeding manual pump after the injector on the hose returning to the tank!
  7. Replacing 8011 hydraulic pump

    Replacing 8011 hydraulic pump

    Hi, I'm going to change the hydroulic pump on my beloved 8011, the service manual is not describing what exactly I can see on the Left side of the tractor. I can see a plate (around 6" by 6") with 4 bolts on the left rear axel. Is it where the pump located? I have received a brand new pump. Do I...
  8. Tractor rebuild books

    Tractor rebuild books

    You may start learning about Diesel engines. There are ebooks that help you understand in detail how they operate but obviously working on one is a must!
  9. 8011 hydroulic is suddenly became slow?

    8011 hydroulic is suddenly became slow?

    Hi, My 8011 Hydroulic is suddenly became slow and takes a very high RPM to get the empty bucket raised! Hydroulic oil is ok . Could that be the hydroulic filter? Or pump? It is easy to have the hydroulic filter changed? Thanks in advance
  10. Zetor 8111 Operator's manual

    wanted Zetor 8111 Operator's manual

    Sorry! I miss read it! I have only the 8011 which I copied and pasted the URL.
  11. Zetor 8111 Operator's manual

    wanted Zetor 8111 Operator's manual

    http://www.cals.cz/zetorservice/files/1/UR_%20II_%208011-12045_GB.pdf
  12. 8011 starting

    8011 starting

    I have done it many times after lifting up the front end using the loader! No luck so far!
  13. 8011 starting

    8011 starting

    What if the power steering does not bleed itself? Any solution? Mine does not and when I take the oil cap off, it see it is bubbling and I have to add oil drop by drop due to air bobbling out! I almost got shoulder dislocation trying to drive the tractor! Thanks
  14. Zetor 3011 colors

    Zetor 3011 colors

    I'm painting my Zetor 8011 with kubota orange (kubota blue for the transmission). I think so far each painted peace looks great. Can't wait to see them all put together. Will post a picture once done! Don't know the original paint!
  15. 8011 noisy hydraulic pump ?

    8011 noisy hydraulic pump ?

    Hi again, I have yet to understand what is what!! Please help me answer these questions. 1- is it the engine oil returned from TA and filtered by the spin on filter on the left side of the gear box? Nothing to to with the transmission/Hydraulic oil? 2- There is a sewer pipe like cap right...
See more
Back
Top Bottom