• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. Replacing 8011 hydraulic pump

    Replacing 8011 hydraulic pump

    I have finally gone ahead a change the hydroulic pump! What a difference! Before changing it, I had 500 psi while ideling,now I get over 1000 psi while ideling. PTO no longer acts wierd too. If I could have done it, everybody can too!:)
  2. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    I don't ever have to use the hand break since my property has hardly a pump! The linkage seems to be ok . I may have to wait till spring to see if the problem persists in warmer temp. Thank you
  3. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    Thank you, Mike If that is the cause, I will be on the mission to replace the cylinder once the weather permits here in Canada. The same wheel has oil leakage from axel seal. Could that be what started the problem on the first place? Thank you
  4. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    Today in -20 degree C, I took me 10 minutes to make it move. Tried forward and backward gears many times. I was able to make a U turn without having the right rear wheel turned a bit! Never used the difrencial lock or .... what could be the cause? Thank you
  5. Zetor 8011: locked rear wheel in cold temps

    Zetor 8011: locked rear wheel in cold temps

    The colder it gets, the harder it is to make my tractor right rear wheel turning. Any idea why? Water in the real axel reservior? Break reservoir? Any help appreciated. Thank you
  6. Fuelsystem issues 8011

    Fuelsystem issues 8011

    Hi, I also had hard time bleeding the fuel line after changing filters using the bleeding screws! I ended up using a break bleeding manual pump after the injector on the hose returning to the tank!
  7. Replacing 8011 hydraulic pump

    Replacing 8011 hydraulic pump

    Hi, I'm going to change the hydroulic pump on my beloved 8011, the service manual is not describing what exactly I can see on the Left side of the tractor. I can see a plate (around 6" by 6") with 4 bolts on the left rear axel. Is it where the pump located? I have received a brand new pump. Do I...
  8. Tractor rebuild books

    Tractor rebuild books

    You may start learning about Diesel engines. There are ebooks that help you understand in detail how they operate but obviously working on one is a must!
  9. 8011 hydroulic is suddenly became slow?

    8011 hydroulic is suddenly became slow?

    Hi, My 8011 Hydroulic is suddenly became slow and takes a very high RPM to get the empty bucket raised! Hydroulic oil is ok . Could that be the hydroulic filter? Or pump? It is easy to have the hydroulic filter changed? Thanks in advance
  10. Zetor 8111 Operator's manual

    wanted Zetor 8111 Operator's manual

    Sorry! I miss read it! I have only the 8011 which I copied and pasted the URL.
  11. Zetor 8111 Operator's manual

    wanted Zetor 8111 Operator's manual

    http://www.cals.cz/zetorservice/files/1/UR_%20II_%208011-12045_GB.pdf
  12. 8011 starting

    8011 starting

    I have done it many times after lifting up the front end using the loader! No luck so far!
  13. 8011 starting

    8011 starting

    What if the power steering does not bleed itself? Any solution? Mine does not and when I take the oil cap off, it see it is bubbling and I have to add oil drop by drop due to air bobbling out! I almost got shoulder dislocation trying to drive the tractor! Thanks
  14. Zetor 3011 colors

    Zetor 3011 colors

    I'm painting my Zetor 8011 with kubota orange (kubota blue for the transmission). I think so far each painted peace looks great. Can't wait to see them all put together. Will post a picture once done! Don't know the original paint!
  15. 8011 noisy hydraulic pump ?

    8011 noisy hydraulic pump ?

    Hi again, I have yet to understand what is what!! Please help me answer these questions. 1- is it the engine oil returned from TA and filtered by the spin on filter on the left side of the gear box? Nothing to to with the transmission/Hydraulic oil? 2- There is a sewer pipe like cap right...
  16. Zetor 7211 - hydraulic oil

    Zetor 7211 - hydraulic oil

    Check this link please, might be helpful. http://www.kroon-oil.com/en/products/product-recommendation/result/ruAgL83NwX4K/zetor-7211-7245-4wd-1984-1993/transaxle-hydraulic-system-10-2/
  17. 8011 Operation

    8011 Operation

    http://www.cals.cz/zetorservice/files/1/UR_%20II_%208011-12045_GB.pdf
  18. 8011- trans/hydraulic oil

    8011- trans/hydraulic oil

    Hi, I have read that we can use SAE 80-90 GL-4 as trans/hydraulic oil in Zator 8011 (see the link below). I am wondering if I can use SAE 80-90 GL-5 instead since I have already purchased that...
  19. 8011

    8011

    I have the workshop too but it is few hundred pages,I can scan the chapter you need.
  20. 8011

    8011

    http://www.cals.cz/zetorservice/files/1/UR_%20II_%208011-12045_GB.pdf
  21. 8011 noisy hydraulic pump ?

    8011 noisy hydraulic pump ?

    I wish I could be any help here! Since we are on this topic, can you please tell me where did you find the hydraulic filter? I see one spin on filter on the left side of the transmission which must be the transmission filter but can't locate the hydraulic filter. I see one place on the right...
  22. Zetor 8011: Heavy oil leak from breathing tube!

    Zetor 8011: Heavy oil leak from breathing tube!

    Thanks for the advice! I will keep eye on the oil loss amount , and if it is about a liter per day or less, I would use the trick and let you know about the result. Thank you!
  23. Zetor 8011: Heavy oil leak from breathing tube!

    Zetor 8011: Heavy oil leak from breathing tube!

    Hi, My Zetor 8011 has been doing very light work/no work in the past year. Yesterday I had to ride it in a slope with high RPM for about 2 hours. I checked the oil today; I noticed I lost lots of oil (below the dipstick min mark). I have added oil, now I noticed that oil heavily leaking from...
  24. How to find Zetor 8011 VIN/Chassis Number

    How to find Zetor 8011 VIN/Chassis Number

    When I removed the seat and floor panel under it on my Zetor 8011, I saw a 10 digits number... hacked on the transmission. It must be the VIN, not sure honestly!
  25. Engaging PTO: Zetor Crystal 8011

    Engaging PTO: Zetor Crystal 8011

    Great! since I have only 7-spline shaft, I don't have to worry about ever reaching the 1000 rpm. Only one quick question please; I noticed when I increase the engine RPM, the PTO speed is increased, I suppose in order to reach the 540, I need to have the engine ran in higher RPM? Thanks very...
  26. Engaging PTO: Zetor Crystal 8011

    Engaging PTO: Zetor Crystal 8011

    I have done it finally!!! What a relief!! Thanks. Dave, I have two more questions if you can please help me with; 1- Can I leave the PTO gear lever under the seat always engaged , and only engage and disengage the PTO with the lever beside the steering wheel? 2- How can I make sure I can only...
  27. Zetor Crystal 8011: sump gasket (coolant)

    Zetor Crystal 8011: sump gasket (coolant)

    Thanks, Dave. I am gonna remove the heater by disconnecting the hoses since I wont be using the Tractor in winters. Once I received the gasket, I will try to change it too. Now I learned that if I need to tighten any bolts in the engine block/cylinder/manifold of an old tractor like mine, I will...
  28. Engaging PTO: Zetor Crystal 8011

    Engaging PTO: Zetor Crystal 8011

    Thank you all for the replies. Dave, I will try it this weekend and will post it if I was successful! Thanks,
  29. Engaging PTO: Zetor Crystal 8011

    Engaging PTO: Zetor Crystal 8011

    Hi, It is somehow embarrassing to say that after owning a Zetor 8011 for six months, I have yet to be able to engage the PTO. The dealer did turn it on and I watched it engaged! and the delivery person has done it after the delivery, unfortunately I did not watch how they haven done so!!! now, I...
  30. Zetor Crystal 8011: sump gasket (coolant)

    Zetor Crystal 8011: sump gasket (coolant)

    Thanks for the replies! The oil is not milky and seems to be Ok! Yes, there is a head bolt right on the side (a few millimeter from the bottom!) to drain the coolant out . Also the heater hot water hose is fed from the same place, therefore it should be a small coolant storage/circulation in...
Back
Top Bottom