- Joined
- Sep 23, 2020
- Messages
- 1
- First name
- zephyrzetor
Hello everyone, new to the forums here, but not new to Zetors. I had a 2008 8040 open station tractor with a self leveling loader and loved it, but I really wanted a cab. I sold the 8040 and bought a 1990 8245 cab tractor.
About a month ago, I blew a hole in the side of the block of my 8245. I replaced the engine with one from an 8011. Everything seemed to bolt up fine. While I had it split, I had the clutch plate rebuilt.
Now, when I try to disengage the clutch, the tractor will stop, but it is extremely difficult to get in and out of gear. Would anyone know if there is an adjustment somewhere, or what my problem may be? Thanks in advance!
About a month ago, I blew a hole in the side of the block of my 8245. I replaced the engine with one from an 8011. Everything seemed to bolt up fine. While I had it split, I had the clutch plate rebuilt.
Now, when I try to disengage the clutch, the tractor will stop, but it is extremely difficult to get in and out of gear. Would anyone know if there is an adjustment somewhere, or what my problem may be? Thanks in advance!