• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. 12245 40kh gear.

    Hey diyfarmer, you ever been inside one? Just wondering how straight forward the repair job would be. I have asked a couple of chaps about it and they said they have never had a problem with one. cheers ;)
  2. 12245 40kh gear.

    Hi all, Can any one give me the part number for the 40kh gear?? Need to do a noisy bearing in the box and thought i might gear the old girl up to make her a bit more user friendly on the main roads and future proof her. Also has anyone been in a Torque Amplifier? Mine is slipping when...
  3. spare parts catalogue

    Hi all, I've been looking in my parts book and was wondering if anyone knows the difference between the following; BK UBK They are used after the tractor model number. Jack.
  4. hydraulic issues

    Hi Bruce I have that same problem with my 12245, I got fed up with having to undo the pipe to bleed the system so I made a T piece up to take another feed line off the pump and put a tap on it. Now when it needs to be bled I just have to open the tap till oil runs out and the system is good to...
  5. hydraulic issues

    Do you mean the 2 small o rings that seal the hydraulic pump mounting plate to the main lift pipe? If so then yes replace them when I did the pump. I still have good hydraulic pressure as the front loader and sheer grab are working, with a very fast cycle time Just the link arms that are dead...
  6. hydraulic issues

    You may be right about air in the system. I took seat and cab floor out to check everything was connected It all looked fine. I checked the hydraulic top filter again as I was there and the oil looked abit foamy, so I drained a bit and it is very foamy. Before I replaced the hydr pump the link...
  7. hydraulic issues

    Yeah it's Open They just didn't work one morning. I was wondering if anyone has come across this before? Renze, you ever been inside the hydraulic top cover?
  8. hydraulic issues

    Oil level is fine and the suction filter was cleaned same time I changed the pump. I will pop the hydraulic top cover off when the cows go out to grass and the loader isn't needed daily for feeding up. I'm thinking it must be on the top link sensing.
  9. Zetor 6441 broken lift control lever.

    hi tony I have had this before on a tractor. I managed to undo the rear cab mounts, loosen the front mounts and jack the rear of the cab up to make just enough room to work. its not perfect but alot easier than lifting the cab off the tractor. The person who had the tractor before had welded...
  10. hydraulic issues

    hi all, My 6945 loader tractor was getting slow on a loader cycle and the hydraulics where slow when lifting so i changed the pump. that has made a world of change when using the front end loader. when i was changing the pump i noticed what looks like a direct feed port on the bottom front...
  11. Chassis/VIN numbers DVLA

    Hi all DVLA want conformation of my 12245 VIN/Chassis number and Reg I got the serial number and engine number, is there a chassis number and if so where should i be looking because i can't see one. cheers
  12. 6945 more power.

    its old school, has the cold start button on the front.:)
  13. zetor 8011 pto problem

    hi all, I have a pto problem with my 12245, ??????the brake stopped working when i was stirring the slurry pit last week and today when i was using the slurry tanker the pto started playing up. It started working intermittently. I would load the tanker fine but when i came to spread, it would...
  14. 6945 more power.

    Renze, if i sort the exhuast and air inlet, think the rad is new but will check it again, how do i tweek the pump. A turbo would be nice but is unrealistic.
  15. 6945 more power.

    any ideas on opening up a pump on a 6945? need some more power.
  16. crystal drawbar

    My zetor has a dromone pickup hitch. it came with a pickup hitch but no clevis draw bar. I use a massy fergie one. it fits and has got me over the problem.
  17. question ZTS/Zetor 12245 pto questions

    Hi sb, i'll try some bar tomorrow and have a fiddle with it all, as for the washers i did lose some in the bell housing when i took the bar back out, but i recon theres enough muck in there to stop them boucing around. Thanks for the heads up jack All Sorted cheers
  18. question ZTS/Zetor 12245 pto questions

    I have found the 1000 shaft and tried to put in back in with washers in the hole but the shaft then fails to turn on the rear end. It seems like its in neutral. Do i have to move the lever on the cab floor, OR have i not put enough washers in to fill the recess in the 1000 shaft. Also am after...
  19. Help For New Zetor 8011 Owner

    The pto lever on the floor next to the seat is for; IN Gear or Land Drive. Only ment to move with engine off i think.. The lever on the dash should be the pto clutch/brake and only works when the bottom lever is in gear. If the shaft still turns when in gear and the brake is on then the brake is...
  20. question ZTS/Zetor 12245 pto questions

    How do i change the pto from 540 to 1000 on my 12245? i can't see any obvious looking leavers or switches.
  21. liquid ballast in tires

    I use tap water and anti freeze and the tyres are tubeless I don't see why you can do the same with tubes.
  22. Wheel Centres

    Evening, I was thinking about moving the wheel centres on the rim for some more width. I have already swapped the wheels around to make it wider but could do with a bit more width. Has any one had any experience with moving the centres on the rims? I know you can have problems with the nuts...
  23. question Water in tires

    Just add normal engine anti- freeze to stop them from freezing. You can pour it in with a jug and funnel and mix it the same as you would for the engine. It will also help to look after your rims with all that water rolling around if you are looking at having water in them for the long term.(If...
  24. 9540

    sounds a bit like its firing on a couple of pots before it gets warmed up enough to fire on the rest. Could be anything from fuel, heat plugs, injector pump, or injectors them selves need servicing. I Would start with the heater plugs. Its a process of elimination till you find the problem...
  25. 9540

    Is it trying to start? We have had a few probs in the cold with the new fuel we have to use now. We have ended up using an additive and this seems to have sorted the problem.
  26. Zetor 12245

    Thanks for the advice, time will tell about the G/box. From what you say its not the end of the world if it does start to play up. When i'm driving the 6945 i always have a cheeky smile. It seems more of an adventure driving the older machines. So lets hope the 12245 is the same. I Wouldn't...
  27. Zetor 12245

    So ZTS, are they still simple, strong, and reliable work horses?...... Like Zetors. The tractor is badged zetor with zts on the front grill. I am after a tractor that will last, with no electrics and is fairly simple to work on after a nightmare with a New Holland TS. (Lets go back to simple...
  28. Zetor 12245

    It is a ZTS. What is the differance between Zetor and ZTR? Cheers
  29. Zetor 12245

    Hi everyone, I have just brought a Zetor 12245 and would like a heads up as to the common faults with them. Just so i can keep an eye out for them. I already run a 6945 and loader which is bomb proof but needed some more horses for field work. Any help would be much apreciated. :cheers Jack
Back
Top Bottom