• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. 6245 Unable to change pto speed

    6245 Unable to change pto speed

    Try to turn in other rotation . You need to turn one half turn . and this is a Neutral position at center . Relase slight the PTO clutch for easy rotation .
  2. Powersteering oil leak...zetor

    Powersteering oil leak...zetor

    You have to clean the parts , and run for 1 minute and recheck . May be a fitting loose or a bad hose Mine has an hydrolic hose cracked and lost my hydraulic stering oil . I put a red oil in the powerstering . so ia can see if it is the spowerstering or another oil that i lost .
  3. Powersteering oil leak...zetor

    Powersteering oil leak...zetor

    You have to clean the parts , and run for 1 minute and recheck . May be a fitting loose or a bad hose Mine has an hydrolic hose cracked and lost my hydraulic stering oil . I put a red oil in the powerstering . so ia can see if it is the spowerstering or another oil that i lost .
  4. 3 point hitch - drooping

    3 point hitch - drooping

    Exact same problem with My 7245 . My snowblower drop and kick up constantly
  5. buttress caps

    buttress caps

    Update for me . Another lever has broken and damaged all other lever finger. I ordered a new LUK clutch assy and splited the 7245. 8 hours labor with a cab and hydro stering . This LUK clutch is awesome No butress . Forged finger acting with solid pin and very smoot operation...
  6. buttress caps

    buttress caps

    On left side of clutch housing , they are a small port aprox 15x10 cm . and i turm engine slowly by PTO and check the internal parts . may be a lever broken or cracked . Had removed a cracked lever on my 7245 two years ago and welded a washer at the end for rapid repair ,
  7. C

    news Zetor focuses on the N.A. market again

    I am in Canada In Bas Saint Laurent , Qubec . No problem here with dealer . Parts are avalable very quicly and The dealer stock is very good . The dealer sold Massey , Valtra and Zetor , very good service .
  8. 3320 Clutch Cylinder Leaking

    3320 Clutch Cylinder Leaking

    First check the fitting ,the hose and the bleeder for leak. A seal kit is avalable but the cylinder assy is cheap . If the brake fluid is dark, change the fluid .
  9. Clutch problems

    Clutch problems

    May be the master cylinder clutch do not release the pressure . If the master and slave are in good condition , remove the small inspection plate on the left size near slave cylinder and check if the 3 clutch levers has a small play . There are 3 ajustement bolt locked with 3 nuts The...
  10. starting

    starting

    clean all connection on Battery and ground . check wiring on the selenoid starter. Put the trans in neutral and make a direct test to the starter . Jump the small wire on selenoide with 12 volt . If not start , Jump the two big wire on starter . If starter run , you have a bad...
  11. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    I had the same problem and shortened the lever Dlilled a new hole on the lever but my real problem was a clutch finger damaged . i had remover this finger and repaired and now this is OK May be the same problem for you . Check by removing the inspection plate and...
  12. 5340 tyre / tire combination

    5340 tyre / tire combination

    Have you the final drive like a 7245 ? You can adjust the rear . just turn the final drive . remove all the bolt and turn the final drive and rebolt .
  13. 7245 chutch problem Solved

    7245 chutch problem Solved

    Hello for two years i had experienced a bad clutch problem I having changed the master and Slave cylinder. this week i taken away the plate and inspect the clutch mecanis with a flashlight . One of the clutch finger was broken and only 2 finger was in good working condition . I removed...
  14. Leeking oil from exhaust gasket

    Leeking oil from exhaust gasket

    No need to replace all injectors . You can just interchange their position and check if the problem stay on the same cylinder . A fresh rebuilt engine has some oil in cylinder and on piston and if the manifold is loose it is normal that small amount of oil leak in the...
  15. Electric fuel pump question

    Electric fuel pump question

    The electric pump must run all the time when the key is ON May be you have dirt or rust in suction pipe in tank You can check this IN disconnect the outlet hose from the electric pump and put a small bootle or can and put the switch ON The fuel flow must be constant . May be a...
  16. zetor 6245 fluids filters and service

    zetor 6245 fluids filters and service

    engine : on my zetor i have a rotary centrifugal oil filter. NEED to be cleaned in varsol or diesel . you can put a good diesel oil 15w40 or in cold winter a 10w30 . front Planetary and rear final drive need heavy oil 80ww90 Front axle , transmission and hydraulic need a...
  17. 5211 steering assist and loader question....thanks

    5211 steering assist and loader question....thanks

    ATF is a good hydraulic fluid for the stering It is a multigrade viscosity ( iso 22/32 or if you prefer , SAE 10/20 ) He has a red color far easy fix a problem from an another fluid. ATF is not totaly compatible with hydraulic fluid . You must filling with same product if you need...
  18. 7745 clunks when making turns

    7745 clunks when making turns

    Exact . Its normal for a Carraro Its has a ratchet inside the differential that relase the pressure when you turn. My 7245 clunk very hard in forrest job .but the traction is superior with this system than the John D .
  19. Zetor 5945 Locked Wheel

    Zetor 5945 Locked Wheel

    First Thing : Open the Planetary gear cover . May be the seal broken , oil lack and planetary Has damaged. Also check the Ujoint On mine a piece of rock has blocked ,last year and i had removed the rock with a hammer . sorry for my bad english .
  20. HELP... smoke comming out of crankcase breather

    HELP... smoke comming out of crankcase breather

    If you use a snow blower You must check your air cleaner priodicly. My 7245 has the same problem and a lot of wather in the bottom air cleaner was the problem. The whater melt with the oil and is aspired by engine. Langis
  21. 7745 oil change

    7745 oil change

    I put 12 liter of fresh oil direct in engine before replacing the oil filter. The hole is verry large and it is very easy to put oil by this way. You can add a little oil by the red plug after for the correct level.
  22. Hello From Canada with Zetor 7245

    hello Hello From Canada with Zetor 7245

    Oui Je suis au Tmiscouata. I do not know if we can speak french on this forum. Langis
  23. Zetor 5945 Clutch Adjustment

    Zetor 5945 Clutch Adjustment

    Hello Maybe a bad master clutch cylinder That has internal leak. That was my problem for the same problem.
  24. Hello From Canada with Zetor 7245

    hello Hello From Canada with Zetor 7245

    Hello I am newbee With Zetor 7245 from now 3 week. I has retreived here on this forum ,many trick and tip for my tractor. very nice forum with lot of experience . My Injector return line Was changed last week acording With some post that concern a difficult starting And now It is ok. Thank...
Back
Top Bottom