• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  • Users: donte
  • Content: Threads
  • Order by date
  1. 5211 thermostat housing and temp sending unit question

    5211 thermostat housing and temp sending unit question

    While replacing the water pump, hoses, thermostat and housing, temp sending unit and fuel line that feeds the injectors on my 5211....I removed the radiator, hoses and all the usual parts....in addition to the exhaust manifold etc. It took several days to acquire all the parts and while putting...
  2. 5211...Does this sound like a lift pump problem ?

    5211...Does this sound like a lift pump problem ?

    Over the last few days my 5211 has been hard to start about 1 out of 5 times....starter spins fine, but takes a while to fire up. I've tried priming the lift pump and noticed the pressure doesnt build up as firm as it has been. Yesterday after sitting for a couple of hours......same thing...
  3. 5211 hung in reverse..how bad is it

    5211 hung in reverse..how bad is it

    Hi guys....was doing some work with my front loader and the tractor became hung in reverse. Clutch has pressure and I can get the gear shift to go into 2nd and 3rd position...but feels like it is then in 2 gears. Was able to back it all the way back to the barn....and then kept trying to get...
  4. 5211 steering assist and loader question....thanks

    5211 steering assist and loader question....thanks

    Hi Guys....I think the oil for my 5211 Front end loader comes from my Trans Gear Box....Does the oil for my steering assist also come from there, if not.....where is reservoir and what fluid does it use? I know this is a stupid question with a simple answer....but would appreciate your help...
  5. Does this sound like a clutch master cylinder, slave or adjustment on my 5211

    Does this sound like a clutch master cylinder, slave or adjustment on my 5211

    Hi, I replaced a brake master cylinder on my 5211 after the reservoir had gone dry several times. I bled the brakes and even though they are a little weak...no more leaks and have [u]some [/]brakes. Now my clutch lets me shift gears a few times, then hangs in gear and I have to kill the engine...
  6. 5211 PTO output shaft noise

    5211 PTO output shaft noise

    On my 5211, the shaft that extends from the rear of the tractor, to which the shredder is attached, is noisey....like a rough bearing or gear. I haven't found a parts diagram...can anyone tell me if there is a bearing on the rear of the PTO shaft...or is this type of noise a clue to a common...
  7. 5211 pulls to right slightly

    5211 pulls to right slightly

    It's really not a big deal, but if I could adjust the steering someway to keep my 5211 from pulling to the right, I would sure like to try it. I think the toe-in is okay, is there some adjustment on the power steering? Thanks guys, Don
  8. Leaking brake fluid on 5211

    Leaking brake fluid on 5211

    Hi Guys...brake fluid is leaking on my 5211, it looks to be coming from behind the brake pedals. I thought it might be the master cylinder and wanted to do a quick visual check. I pulled the inspection cover under the steering wheel but cannot see the m/c. I also tried to pull the rest of the...
  9. Does this sound like a bad starter on 5211

    Does this sound like a bad starter on 5211

    My 5211 was starting great....changed oil and cleaned filters, still started fine. But noticed all the trash in the fuel filter bowl and after cleaning it out forgot to refill bowl before trying to start. Didn't crank more than a few seconds for a couple of times before remembering to fill the...
  10. changing engine oil on 5411

    changing engine oil on 5411

    Boy this makes me feel dumb, but I find the dip stick and crankcase drain plug on my 5411....but not sure where the engine oil filter is located and how to put in new oil. I dont see a oil filler cap. I ordered a Operator's manual but the pictures are not clear. This baby needs love and I'm...
  11. Paint for 5211

    Paint for 5211

    Where do I find original color paint for my 5211, I want to do some restoration and I'm not sure if it's available...or do I need to pick something close at a auto parts store. Any tips for me? Thanks in advance for your help.
  12. 5211...front wheel is loose

    5211...front wheel is loose

    I know this is a dumb question, but have only had this 5211 for a couple of weeks...and still haven't gotten any service manuals; one of the front wheels appears loose....like a car wheel would be with a loose axle nut and/or worn bearings. Is the 5211 set up the same way....and what capacity...
  13. what is the difference in 5211 service manual, and workshop manual

    what is the difference in 5211 service manual, and workshop manual

    I need to order a operators manual and repair manual for the 5211 I bought. I found a company online that sells manuals...and they list Service Manual, and Workshop Manual. Can anyone tell me what is the difference in the two. Thanks
  14. Help....How do you unstick brakes, may be emergency lever related

    Help....How do you unstick brakes, may be emergency lever related

    I finally got my 5211 and used it for a few hours....then this morning spent some time checking things out and pulled the parking brake. Then the right brake was stuck. Tried pulling and releasing the lever lots of times...but the lever became very tight...and brake still locked. Can someone...
  15. Replacement seats for 5211

    Replacement seats for 5211

    The original seat on my 5211 is much larger and sturdier than any of the aftermarket seats I've found so far (mounting base, height etc). Has anyone out there found one that is comparable to the factory seat.....or since there is nothing wrong with the metal mount and slide...do you know of a...
  16. 5211..killing the engine

    5211..killing the engine

    I bought a well-used 5211 and it hasn't been delivered yet, but was told turning off the ignition switch won't kill the engine. Was told I must lower the loader bucket at a slight forward pitch, then put transmission in one of the higher gears and pop the clutch...thereby stalling the engine...
  17. How do you determine year of mfg of 5211

    How do you determine year of mfg of 5211

    I just bought this 5211 and would like to know the year of mfg. I'm a newbie and havent found a listing of year models by serial number. Serial number is 039253. Could someone steer me in the right direction. Sincere thanks for any help you can give.
Back
Top Bottom