• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  • Users: carrick
  • Content: Threads
  • Order by date
  1. 9540 electrical fire

    9540 electrical fire

    Had a small fire under the floor of the 9540 tonight, luckily I had an extinguisher which took care of fire. 5 min later the starter engaged and I had no spanner to remove grill guard to isolate battery ( stupid place for isolator ) so ran battery flat. Any idea if it is big job to rewire, or...
  2. 9540 steering problem

    9540 steering problem

    9540 with 5000 hours has a problem with power steering. It occasionally locks when turning left or right. Turning slightly the opposite direction immediately clears blockage, or you can force the wheel round if in a field and not panicking. Have changed the oil and filter with no improvement...
  3. 4 WD wheel allingment?

    4 WD wheel allingment?

    When I switched the front wheels arround to narrow the wheeltrac on the front axle of a '79 16045 to allign the tractor for ploughing, the valves are on the inside. On full lock the valve hit the trac rod end and sheared. Has anyone experienced this problem or got a solution?
  4. Roller on drain bung magnet

    Roller on drain bung magnet

    Was draining backend oil from ur2. two questions? A roller from a bearing was attached to the magnetic bung. Apx 10mmX1.5 mm. I know this is not good, but is it OK to keep going until the fault identifies itself? Only 4 litres of oil came out the drain bung centre of gearbox housing. After...
  5. pto not stopping

    pto not stopping

    PTO on my UR II won't stop. heavy to turn by hand when the engine is stopped if that makes any difference.
  6. Poor Position Control UR2

    Poor Position Control UR2

    The outer control hydraulic lever wants to spring to 10 o'clock position and gives very poor position control. Only have the 16045 a few weeks so I do not know if the draft is working accurately or not. Could this be a valve problem or a linkage problem. I have never had a top of before but am...
  7. 16045 16 Speed

    16045 16 Speed

    Just bought a 16045, 1980 and seems sound machine from what I can see. Have read here that this tractor should have 12 x 8 gearbox, mine has full 16 x 8 box, apx 30km/h on 18.4x34 tyres. Do I need to avoid using a gear under load to preserve gearbox, if so, which one? Also, some previous...
Back
Top Bottom