• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. zetors dont't break down?

    zetors dont't break down?

    of course you are right, i just want people to tell me about their problems so i can enjoy reading and helping (if possible). I am only saying what everyone is thinking. So if you have a problem TELL US Just selfish really
  2. zetors dont't break down?

    zetors dont't break down?

    Having a Zetor myself i quite often come on this site to see what problems other people are having. However there seem to be less and less problems with zetors. Therefore depriving me of a good daily read and problem solving. ....I have now been forced to read other tractor websites where they...
  3. zetor 4718

    zetor 4718

    we can only keep the site going by contributing. nice one mathew
  4. zetor 4718

    zetor 4718

    you can try adjusting one of the 5 nuts on top of the housing in front of the speed selector/hydraulic selector that is in front of you when sittiing down. i do not know which one adjusts the 4 gear. otherwise it should be quite straight forward to take everything apart and put it back...
  5. zetor 4718

    zetor 4718

    if you can not free it, turn the cylinder round and drill a hole in the rear opposite the cold start button, then push it out. mine was seized in and this worked fine. It is on this forum somewhere. I think the gap between the nuts affects the cold start. One nut seems to be a lock nut. i had...
  6. zetor 4718

    zetor 4718

    glad you got it going. All parts available and cheap. i use roy perfect but there are loads of other equally good suppliers. Cold start is on the left hand side of the tractor if you are sitting down. it is on the side of the fuel pump near to the compressor. there is 1"aprx pipe with 3 nuts on...
  7. oil selection help for your Zetor

    oil selection help for your Zetor

    thanks for the information. i have just used the link and everything was spot on.
  8. will a 7045 loader fit my 6745/

    will a 7045 loader fit my 6745/

    thanks, i thought there was a chance. never quite sure what fits what. i have posted a similar question before but the loader sold for two much money and was from a different model.
  9. will a 7045 loader fit my 6745/

    will a 7045 loader fit my 6745/

    there is a 7045 loader for sale on ebay. i just wondered if it will drop straight on my 6745. It says is in reasonable condition. i expect it to go for about 500. Alternatively i am after A LOADER or some cheap brackets so i can find the matching loader. many thanks, MARK
  10. loader for a 6748 without a cab

    loader for a 6748 without a cab

    yes i am going to have to do it properly. i already have the quick couplers on the back, for my hydraulic post knocker. thanks, mark
  11. loader for a 6748 without a cab

    loader for a 6748 without a cab

    thanks for the advice renze. would a 4 wheel drive come from the factory with the rear supports? how much extra for the supports and how do they fix? i have read and seen your self build loader. i am not that skilled so i will have to buy one. did you run the hydraulic from the rear axle as i...
  12. will a loader from a 5711 fit my 6748?

    will a loader from a 5711 fit my 6748?

    i have seen a loader from a 5711 and need to know if it will fit my 6748. i do not have a cab on anymore so it really is a 6745. i need to know quickly as he has had other enquiries. many thanks again, mark
  13. 5% petrol in diesel, cold starting

    5% petrol in diesel, cold starting

    hey steiner, nice to find another 6748. how long have you had yours and your opinion on them? i bought the geared starter replaced all the plastic and rubber fuel hoses. Starts well now just a 2-3 of starts. glad to find you were able to fix the clutch problem with the mig welder through the...
  14. loader for a 6748 without a cab

    loader for a 6748 without a cab

    ricc yes, you are right. i do not know how to test this. might put a length of timber along side the tractor wher the supports go. then put the wheels to full lock,see if they touch. the 5711 only had the little axle and wheels.
  15. loader for a 6748 without a cab

    loader for a 6748 without a cab

    i have seen a loader from a 5711 that was fitted with a duncan cab. it is not powered up but i can do that if i have to. i could do with some photos to see how the loader actually fits on. Will this fit my 6748 (no cab) thanks, mark
  16. loader for a 6748 without a cab

    loader for a 6748 without a cab

    forget the poor starting in the cold..... probably low compression will fix in the summer. i am now after a decent power loader that i can bolt on. are there any other zetor loaders that will fit the 7 series as this will expand my search are the trip bucket ones easy enough to convert? does...
  17. 5% petrol in diesel, cold starting

    5% petrol in diesel, cold starting

    thanks for all your answers. just going to have to remember it is an old tractor and instant starting is a thing of the past. Starts ok! in normal English weather seems ok with everything else. if i turn the pto to neutral witrh cutch in, it seems to help. perhaps this is the proper way to...
  18. 6748 not starting as well

    6748 not starting as well

    thanks ricc. it does always start after a while. maybe i am just being to fussy. mark
  19. 5% petrol in diesel, cold starting

    5% petrol in diesel, cold starting

    thanks for answers, gonna put a drop of petrol in and see if it helps. still no answer on the revs when starting with the cold start button, or whether to prime before starting i am just wondering if something is not quite right. thanks, mark
  20. 5% petrol in diesel, cold starting

    5% petrol in diesel, cold starting

    has any one used the 5% petrol in diesel during the cold weather? some finland friends do it and i know of some canadians who use the same method to keep their machines running smoothly during freezing weather. i also do it in my mitsubishi shogun helps starting. my 6748 does not start...
  21. 6748 not starting as well

    6748 not starting as well

    did you ever get this starting problem sorted out? mine is slow starting now. cold start button does help but the revs are at full so i move the lever to 1000. some one told me to put 10% petrol in ? thanks
  22. Clutch-problems 6748

    Clutch-problems 6748

    i to have a 6748. love it. If it's a change of clutch you will have to split. Straight forward, use a good friend with basic mechanical skills. take photos if you are unsure. Should take a whole day. i normally do dismantle on a saturday and put it back together on a sunday. takes the hard...
  23. Differential Shaft Bearings

    Differential Shaft Bearings

    there is a bloke on ebay with the proper workshop cd. it shows all the exploded views etc. 5. do it once do it properly good luck,
  24. ZETOR TRACTOR PARTS

    ZETOR TRACTOR PARTS

    i as many others use roy perfect. next day delivery and fixes zetors himself. advice is always on hand so this might make up for slightly more expensive parts. good luck
  25. hydraulic lift cylinder 6748

    hydraulic lift cylinder 6748

    just as an add on i used roy perfect (penrith) for parts and he talked me through any problems. including putting the new seals in boiling water so they would fit on the piston.
  26. hydraulic lift cylinder 6748

    hydraulic lift cylinder 6748

    just to let anyone hesitating and worried about changing the lift cylinder seal...do not be. i am no mechanic but i had to do it as my post knocker weighs 700kg and it was doing the dropping a couple of inches and returning. just undo all the bolts and remove the seat. then remove all the...
  27. is 6748 change on the go

    is 6748 change on the go

    seems a lot of pulling power for this size of tractor. i wont be trying, i haven't got any thing big or heavy enough, MMmm just going to check the wife........... love the tractor though. got a few sealand o ring problems. lift ram seal is next.
  28. is 6748 change on the go

    is 6748 change on the go

    thanks for that. i prefer the starting off in gear i need. i bought both manuals and it confused me a bit. seems to be a good machine. only a seal fault so far....
  29. is 6748 change on the go

    is 6748 change on the go

    totally crap at tractors.... but is the 7 seies change on the go. ie while driving do i start with 1 and change while moving or do start in the gear i want and stay in this gear. both seem to work although changing on the go will take a bit of getting used to. i may as well find out now...
  30. 6748 leaking at top of lift arms

    6748 leaking at top of lift arms

    done it, took the arm off and all it needed was another packer to squeeze the o ring tight. however i fear i may have to do the inside lift seal. having read some of the forum, i can see it is quite a common problem. any tips...........
Back
Top Bottom