• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. Zetor 3045 - steel bonnet?

    question Zetor 3045 - steel bonnet?

    Hi everyone, I'm looking for a steel bonnet to fit a 3045 (the round bull nose type). Can these be got anywhere? or is there any alternatives? Thanks Sean
  2. 3045 gearbox lid

    3045 gearbox lid

    Hi all, I want to lift the lid on my 3045 gearbox is there anything I need to do before I proceed for example do I need to remove the adjusters at the back of the lid between the hi/low and pto selector levers? Many thanks Sean
  3. remove the fuel tank on a 4718

    remove the fuel tank on a 4718

    Hi Steve, I had the same problem with the steering wheel on my 3045. I had to use the pullers to get it off although the end of the shaft wasn't mushroomed like yours. I used 2 legs on the pullers attached to a clamp bolted together below the wheel. Lots of WD40 and a decent pair of pullers. I...
  4. more 3045 questions

    more 3045 questions

    Hi guys, how do i remove the crankshaft pulley from this tractor? is there a special tool for the job? i need to get the timing cover of as it has 3 broken studs in it that hold on the sump. any ideas greatly appreciated sean
  5. Zetor 8541 Proxima Plus

    Zetor 8541 Proxima Plus

    Hi Folks, We have just purchased one of the above tractors (1year old and 250 hours) and are well pleased with it. Just one thing however, it is difficult to change gears espically when trying to change down to get in gateways and such. I was wondering if this has to do with the tractor being...
  6. another 3045 question

    another 3045 question

    Hi, I got parts from this guy for my 3045 and sent over to N. Ireland for a farily decent price also. www.motocheck.fi Good luck Sean
  7. 3045

    3045

    Hi, I removed my steering wheel using a set of hydraulic bearing pullers. Remove the centre cap and you'll find a castle headed nut remove the split pin and nut. If you can get a set of pullers with a clamp attachment all the better, fit the attachment below the spokes of the steering wheel...
  8. FYI

    FYI

    Hi Guys, I been looking for a CV joint for a zetor 3045 for a while and I came across this company in Slovakia who make whole new half shaftscomplete with a new universal joint albeit just a single one but it is good and big allows the full steering lock to be achieved. They also manufacture...
  9. axle swap?

    axle swap?

    Hi people, Can anyone tell me if it is possible to swap the front axle from a 5455 to a 3045? Thanks Sean
  10. 3045

    3045

    Check your pm Sean
  11. 3045

    3045

    Hi all, I'm looking for a replacement front axle for a zetor 3045/3545 or even parts for said axle. Thanks Sean
  12. front axle on a 3045

    front axle on a 3045

    Hi, Here's what I'm talking about! http://www.facebook.com/home.php?#!/photo.php?fbid=196677410361234&set=a.196673153694993.54181.100000569303396&theater
  13. front axle on a 3045

    front axle on a 3045

    Hi Matthew, I have the swivel housing of and now face a CV joint that somebody has butchered at before! Is it possible to get a replacement zetor CV joint? or should I be looking for something about the same size of a more modern piece of kit to replace it? Thanks Sean
  14. front axle on a 3045

    front axle on a 3045

    Alright prople have nearly completely dismantled the front axle on the 3045 just a couple of questions; The swivel housing at the outside end of the half shaft can it be dismantled? If so how is it done? Also any other advice on this axle would be helpful Cheers Sean
  15. front axle on a 3045

    front axle on a 3045

    Hi, I need help with the front axle of my 3045 ??? are these axles hard to refurbish? I took the front casing of the diff lock and the bearing fell at my feet in pieces! and there is a lot of play on the driven shaft going into the diff. Is this play unusual? and will it have done damage futher...
  16. 3045 hydraulics

    3045 hydraulics

    little help here guys please{:-(
  17. zetor 5.5 rur manure spreader

    zetor 5.5 rur manure spreader

    thanks renze very useful sean
  18. zetor 5.5 rur manure spreader

    zetor 5.5 rur manure spreader

    hi all, i was wondering if anybody has an operators manual or parts manual for the above machine:-/ as i need to do some repair work on it 69) cheers sean
  19. zetor 5.5 rur manure spreader

    zetor 5.5 rur manure spreader

    hi all, i know this is not the right forum {:-( but i was wondering if anyone has an operators manual for a zetor 5.5 rur manure spreader or even a parts manual.:( any help appreciated;) sean
  20. 3045 hydraulics

    3045 hydraulics

    hi, as most of you know i'm restoring a 3045. i recently changed the transmission oil and cleaned the filter and now when i engage the pto lever full forward the lift arms do not rise but the pto spins ok and the external supply works as well. i'm i missing something simple or is there a fix...
  21. 3011 Mudguards

    3011 Mudguards

    Hi, I'm restoring a 3045 at the moment and have recently bought a pair of orginal mudguards from a guy in finland along with a lot of other bits and pieces and he parceled the whole up and sent it over to northern ireland all for 877 euros' he email address is listed below if you want to check...
  22. 3011 parts wanted urgently ireland or uk!!!!!

    3011 parts wanted urgently ireland or uk!!!!!

    Hi, I'm restoring a 3045 at the moment so most of the parts are the same. You can buy replica mudguards from Barlows in England at 925 + vat + postage, any of the other body panels I'm not sure about. However I got orginal mudguards, headlights indicators etc from a guy in Finland posted over...
  23. Looking out for Zetor 3045 spare parts!!

    question Looking out for Zetor 3045 spare parts!!

    Hi all, as i have mentioned before i'm currently restoring a 3045 and some of the parts such as mudguards and light clusters are proving very hard to find. having said that i've managed to source some parts from finland :D but i'm still looking for rear light clusters belonging to these...
  24. parts purchase

    parts purchase

    cheers Liam, it's good to know that someone else has dealt with motocheck and is happy with thier service sean
  25. parts purchase

    parts purchase

    hi all, just wondering if anybody has bought any parts from the motocheck group in finland. i'm going to place an order but would be happier if i heard from someone else before doing so. BTW i'm from northern ireland cheers sean
  26. 3045 4wd

    3045 4wd

    i'm based in co. antrim n.ireland, there are a few breakers round here so i'm foraging around these!!
  27. 3045 4wd

    3045 4wd

    thanks chrus, the drop box has been welded up since and seems not to be leaking so i think i'll leave as is, but i'll have to start searching the scrappers for the brake fluid resevoir as the current one consists of a 1/2 inch hose running up the inside of the mudguard!! also any help...
  28. 3045 4wd

    3045 4wd

    hi all, at present i'm restoring my 3045 and i've just discovered that the drop box for the 4wd has been perviously damaged. i was wondering how hard these are to obtain or whats the availability second hand or is it worth replacing given that the 4wd seems to be working ok? also on these...
  29. 3045

    3045

    Hi people, I have recently accquired a 3045 and i am looking for a workshop/owners manual for this model and i am also in the market for a pair of mudguards as well as a lighting kit if anyone can help please let me know thanks.
Back
Top Bottom