• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. More Power

    tAKE THE BACK OF THE PUMP AND SCREW THE ADJUSTER 1/4 TURN INWAYS.
  2. re hsx 110 2014

    130 hsx here. Tractor does not like idling for long periods, causes exhaust dpf blockage, so we simply turn the key off. EGR was plated off upon delivery, do this with all my engines. ECU replaced at 800 hours due to numerous codes coming up on dash, but no real faults. Warranty. That is the...
  3. ur1 parts northern ireland

    Troughton, Poyntzpass
  4. FINALLY Proxima range with EHR :)

    I am with you Renze on this one... HSX had been flashing random fault codes during all tasks, some requiring you to stop the engine, but when you started again in a minute fault codes had gone. This was an embarrassing nuisance so I left it with the dealer for 3 weeks. On return all was fine...
  5. 9540 electrical fire

    Thanks, was wire from battery coming in and as you say, fire melted starter wire. All good again now..
  6. 9540 electrical fire

    Had a small fire under the floor of the 9540 tonight, luckily I had an extinguisher which took care of fire. 5 min later the starter engaged and I had no spanner to remove grill guard to isolate battery ( stupid place for isolator ) so ran battery flat. Any idea if it is big job to rewire, or...
  7. Forterra HSX

    Any one ploughed with the hsx hitronic yet. I puling a 4 score reversible spring release and would prefer the draft on fortera, wondering have I it set correctly?
  8. 9540 steering problem

    Those plates have grease nipples from new on the 9540. Steering is sticking in same place each time, just right of straight, even though the steering wheel may be in a different position. Would this indicate it is an axle problem, not the orbital?
  9. Zetor 10011 hidraulic pump

    Fit an oil cooler, not a big job, there is room up front. look at the 16145 and it will have one fitted. If you replace with larger pump oil will heat more due to the increased flow creating increased friction. As mentioned above, the heat is probably being caused by your worn pump.
  10. Forterra HSX

    130, central drive shaft
  11. 9540 steering problem

    Do not think bearing can be pitted as I had tractor from new and it is housed 95% of the time. Will look at the plate you mention an see if I am brave enough to drill it in situ. Thanks.
  12. 9540 steering problem

    Thanks for the advice folks. Re grease, did you drill the hole with out dismantling the hub, a I know from experience with UR2 this is a heavy job.
  13. 9540 steering problem

    9540 with 5000 hours has a problem with power steering. It occasionally locks when turning left or right. Turning slightly the opposite direction immediately clears blockage, or you can force the wheel round if in a field and not panicking. Have changed the oil and filter with no improvement...
  14. Any suggestions on repair or replace if so where

    Tractor looks fine. if engine, clutch or brakes aint seized your in business. let us all know how it goes...
  15. Just got my Forterra 140 HSX :)

    During field work if I travel above 18 km/hr for a short period 4wd disengages .My risks occurred spreading field tipped manure on hill land. Traveling to the pile to reload disengages 4wd even though I may be traveling down quite a steep incline on grass. It does not reengage auto so you may...
  16. Just got my Forterra 140 HSX :)

    Yes I still operate a 16045 and 9540 Renez, but we all drive cars, so the confusion continues, my most frequent mistake is 1st to 4th, thinking I'm going second to third. Four wheel drive braking below 5 km/hr should be only when 4wd is selected so as lock is not restricted during yard work. I'v...
  17. Just got my Forterra 140 HSX :)

    Good luck with the new tractor. Had mine 6 months now. Still not used to gear pattern, 12 speed box had enough gears in my opinion, better than 15 you can not comfortably use. How are you finding the bleeping clutch and right side steps. I am fed up with clutch and had to modify the steps...
  18. Anyone tried the Forterra HSX 2013 edition ?

    All Good, no teething problems. Has anyone heard of problems with the clutch packs on the proxima range. Dealer tells me that is the reason a warning sound is given each time you slip the clutch, or rest your foot on the pedal above 1200 rpm. The computer recorded 36 such incidents during the...
  19. Anyone tried the Forterra HSX 2013 edition ?

    Well impressed so far. Think 1st gear must have lower ratio, start off is great in comparrison to 12445. Lots of pulling power, smooth gear change, display takes guess work out of many opperations, ride is good, though was delivered with 30 psi in front wheels?? now 18psi. Lock is amazing...
  20. pto not stopping

    Had the torque pump replaced and had to replace a drum which was letting oil past it, new clutch while I was there. now torque and pto drive strong, but brake still not fixed,. When we had pto pack out originally, took it to dealer to have it checked and he removed one disk as a precaution...
  21. Forterra 9641 lack off power

    On your gear stick gripe. I modified my shuttle to a left hand steering wheel stalk. The stalk sends a electric signal to a regulator which diverts air to a ram mounted on shuttle gear leaver, moving it back or forward. Had the ram made to measure so as the stroke never rests on a selector and...
  22. Ideal Plough

    Land not Tractor your choice maker. Hard ley for reseeding on steep incline>:-( I'd go for 3X14, esp if spring release plough. Flat fields previously cultivated, 4 x 16 no problem, even with a press.
  23. Anyone tried the Forterra HSX 2013 edition ?

    No experience on any of the smaller range accept a testdrive in the power prior to ordering. I would say the proxy gives better pedal control, the hsx feels like the pedal is a switch, like the button on the stick. If you want gradual clutch release, you must use the steering colum lever. Hope...
  24. Anyone tried the Forterra HSX 2013 edition ?

    Bought one, but it still in dealer as I have not had time to prepare my trade in , and plan is to complete current contract before exchange. Never needed anything like 800 kg wearing my front tyres before, so do not plan to use it now. Shuttle is smooth, seat is standard Grammer Air. Cab a lot...
  25. 9540 naughty

    I do not know how the switch / lever work, but perhaps disconecting it causes it to raise, perhaps try sending a constant power to it. Most of the problems with these tractors are simple faults causing major headaches
  26. Zetor 9540 clutch problems

    If you flick the torque in to low before or whilst changing gear, it always changes smothly for some reason, don't ask me why-
  27. Forterra 9641 lack off power

    Also think insurance companies here would have a problem with the weight of the horse / weight of cart ratio. 9641 is much the same as my 9540. Will die before it will put out black smoke, you will be ready for bed when the fuel tank is empty. I opened my fuel supply 1/2 a turn when I bought 4...
  28. 9540 naughty

    Have you checker the switch and wiring on the button on right hand pillar with a plough symbol on it ?
  29. Zetor 4718 Turbo 150+ bhp

    Whatever the question was, the answer is MORE POWER Are you still sure about your signature after that video?? Awsesome viewing, but I would not like to be in the same field as him, never mind on the mudguard.....
  30. C

    news Forterra HSX redesign for 2013

    Agree on hydr lever. have even dismantled mine in the hope of being able to change the linkage so as controls could be forward back rather than up down to no avail, but would be a very simple fix for the designer/production team. Now they have covered the controls with plastic an after fit would...
Back
Top Bottom