• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. Hydrostatic steering kit

    Hydrostatic steering kit

    Ive had problems with the steering of my 6245 for as long as I have had it. Yesterday I broke the rod end that connects to the steering cylinder and now have no steering at all. Instead of spending a lot of money reconditioning the steering and still have mediocre power assisted steering I am...
  2. Introduction & Request for help on 4911 hydraulic problems

    Introduction & Request for help on 4911 hydraulic problems

    Mine does the same thing. I am on the verge of ordering replacement parts (inner circuit control linkage and the rod it pivots on) to see if that rectifies the problem. keep us posted with how you go. Paul.
  3. 8011 zetor

    8011 zetor

    I used the oil drain hole on the rear axle of my 6245 for the return line of the loader and took the pressure from the plug on the pump plate on the bottom of the rear axle as well. You have to have the remote lever locked either fully forward or backward to get pressure at that point, but it...
  4. Introduction & Request for help on 4911 hydraulic problems

    Introduction & Request for help on 4911 hydraulic problems

    In my limited experience with my 6245, I have had the following issues: There is a pipe that runs through the diff housing between the pump plate and the top housing, this is sealed with o rings, mine got old and brittle and failed causing a loss of pressure. My lift cylinder seals were damaged...
  5. Introduction & Request for help on 4911 hydraulic problems

    Introduction & Request for help on 4911 hydraulic problems

    Just don't pay for it ;D Sounds like you are having similar issues to me with my 6245. I have yet to get mine sorted out but have found a few other problems along the way. I'm at work now but I'll post some suggestions when I get home.
  6. Need Advise on repair 6320

    Need Advise on repair 6320

    [url=http://www.website.com]http://www.ibeno.cz/ukindex.htm[/]
  7. Need Advise on repair 6320

    Need Advise on repair 6320

    I think I would be going somewhere other than the dealer! It's not a warranty issue so anyone can do the job. Perhaps ask around locally for a mobile tractor mechanic that will visit you? I suspect the brake issue will be hydraulic as well, if it reoccurs replace the master cylinders and think...
  8. Zetor 6441 top link on 3pt question

    Zetor 6441 top link on 3pt question

    I had the same issue on my 6245 when I bought it. I just filed enough off the flanges of the ball on one end of a Bareco top link so it would fit. In my case the very top hole for the pin is cat 2 on one side and cat 1 on the other which is a bit odd, all the holes below are cat 2. Hope that...
  9. Inner circuit spool valve

    Inner circuit spool valve

    I did see that, but couldn't see how it adjusted as there didn't appear to be a slot to alow for movement. I'll have another look though, thanks. I also tried taking the lever off the shaft to rotate it on the spline, but the spline is indexed so no joy there. Give it a couple of weeks untill I...
  10. Inner circuit spool valve

    Inner circuit spool valve

    The whole manual is like that, but once you actually have a go with the tractor in front of you, it's not too bad.
  11. Inner circuit spool valve

    Inner circuit spool valve

    Tried both those things. It's amazing how complicated the manual makes a simple procedure sound! I got a little more travel but when I put the quadrant lever cover back on what I gained was lost as it limits the travel of the inner circuit leaver somewhat. Thanks for the suggestions though, keep...
  12. Inner circuit spool valve

    Inner circuit spool valve

    I wish it were that simple, but in my case unfortunately not. I am not getting full travel at the upper arms, probably only about half to two thirds. Definately something wrong with the hydraulic distributor or the mechanism that controls it. I did find what looks like a steel pin or plug of...
  13. Inner circuit spool valve

    Inner circuit spool valve

    Bump Thoughts anyone?
  14. Differential lock pedal

    Differential lock pedal

    Down is engaged on my 6245.
  15. Inner circuit spool valve

    Inner circuit spool valve

    Yes there is a spring between the two halves. To give you a bit of back ground, the tpl has never worked correctly on this tractor. When I bought it, there was no controll at all, so I removed the hydraulic cover and replaced all the o-rings in the hydraulic distributor and the seals in both...
  16. Inner circuit spool valve

    Inner circuit spool valve

    Can anyone that has had thier hydraulic distributor apart recently varifyed that the inner circuit spool valve from my 6245 in the picture below is assembled correctly? I am having trouble with my 3pl and as best as I can tell from the workshop manual and parts book, that is correct but I am not...
  17. Loader mounting points

    Loader mounting points

    Found them. Thanks. I was looking in eBay Australia:)
  18. Loader mounting points

    Loader mounting points

    Hi Mike. Thanks for the heads up on that. Unfortunately I haven't had much luck finding the brackets you mentioned on eBay. I don't suppose you could post a link? Thanks. Paul.
  19. Quicke loader bracket 6045 or 6245

    Quicke loader bracket 6045 or 6245

    Hi Renze. I know this is an old thread, but if you still have the cad files for the loader brackets I would be interested in a copy as well. Thanks :) Paul. paul at shurvell dot com
  20. Loader mounting points

    Loader mounting points

    Hi all. I am considering fitting a front loader to my 6245 and was wondering if any one could send me some pictures of the mounts and mounting points on a tractor from the same series? I can't afford to buy a new loader at the moment so I am thinking of modifying a second hand loader to fit and...
  21. 6245 hydraulic issues

    6245 hydraulic issues

    Hi Aaron. Surprisingly enough I am in Australia :) The tractor is located in Kennedys Creek which is about 30 km inland from the 12 apostles & Great Ocean Road. I have it back together and running at the moment, The three point linkage is working but I suspect not as it should, I have a feeling...
  22. 6245 hydraulic issues

    6245 hydraulic issues

    That's good to hear. You want to come and do mine for me? it's doing my head in :)
  23. 6245 hydraulic issues

    6245 hydraulic issues

    Hi Aaron. I am still working on the problem. I now have a parts manual (bought another one, the one I bought from Canada STILL isn't here!) and if you look at the image below, I believe it is item 80: change over pendulum and there are no rollers shown in the parts book so I think that is how it...
  24. 6245 hydraulic issues

    6245 hydraulic issues

    Just an update on my hydraulic woes. I found where I was loosing pressure, both the o-rings on the connector between the hydraulic distributor and the pipe coming from the hydraulic pump were broken and I believe this was aerating my oil giving it the thick creamy appearance. The lack of control...
  25. hydraulic problem

    hydraulic problem

    Hi Michael. I am probably not the most qualified to answer this as I have nay just bought my first Zetor (6245 like yours). I am not sure if you are aware that the hydraulic pump runs off the pto shaft? The pto leaver has 4 positions, the first, all the way forward is hydraulic pump only, the...
  26. 6245 hydraulic issues

    6245 hydraulic issues

    Thanks for the heads up Bob. I've sent you an email.
  27. 6245 hydraulic issues

    6245 hydraulic issues

    Hi Mike. Thanks for the advice. I'll try and get hold of a pressure gauge and do a bit more investigation. In the mean time I'll email my parts supplier and get a price for seal kits for the lift cylinder and hydraulic distributor. If they aren't too expensive I may as well replace them while I...
  28. 6245 hydraulic issues

    6245 hydraulic issues

    I have the workshop manual and the owners manual. The factory workshop manual I think assumes a fair amount of prior experience which I don't have:) Paul
  29. 6245 hydraulic issues

    6245 hydraulic issues

    I have recently bought a 6245 that has been neglected for the last few years and has a few issues. I have sorted out most of the problems, installed all new fuel lines as the old ones broke if you looked at them the wrong way and replaced the clutch master and slave cylinders and along with the...
Back
Top Bottom