• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. Restoring a Zetor 3511

    question Restoring a Zetor 3511

    You can get new mudguards,lights,paint,all the mecanical parts,radiator, starter-motor, ect... from zetor dealer and Injectors,gaskets and other funny bits and things from barlows For the idle- You must fill the injector pump with oil until it is full to the top the first time, then drain it...
  2. Digging gear

    Digging gear

    Put a big log or something on the discs to weigh it down, then it will work;)
  3. Fitting a Turbo

    Fitting a Turbo

    Normaly you will get at least 15% - 25% HP increase simply by bolting on a turbo and opening up the fuel pump. A intercooler is not neccasary for such a conversion. Tempratures will remain much the same
  4. imagine zetor construction equipment!

    imagine zetor construction equipment!

    There was also forestry machinery with zetor engines.
  5. Starter for ZETOR 8401.1 engine (1986)

    Starter for ZETOR 8401.1 engine (1986)

    I think the zetor part number is- 80357918 That is the starter motor that fits the 8401 engine.
  6. How do I go about recovering refrigerant

    How do I go about recovering refrigerant

    All I have ever done Is unbolt the compressor and stuff And fold it back over the tractor complete with pipes atached (It was a van actually) You can do the same with power steering and stuff (On a van) Never done it on a tractor though but i think its the same thing:-x
  7. Rear digger

    Rear digger

    I really would not recomend a 3545 for driving over rough ground especialy if there are tree stumps,ant hills or similar (even though i have one, and use it for this:-x) So far I have managed to destroy a 4wd-dropbox, Knock a propshaft clean off the axle,knocked a hole in the front axle diff...
  8. 3545 tyres

    3545 tyres

    10-24??? 9.5-24??? I dont know, something like that:-/
  9. 3545 clutch probs HELP URGENTLY

    3545 clutch probs HELP URGENTLY

    On other tractors David Brown,John Deere ect.. its the other way around. Thats what they taught me:-/ No wonder My pto clutch does not work properly 69)
  10. fahr centipede

    fahr centipede

    My 3545 once ran a bamfords (JF) 2 drum mower for 10+hours. now i use a leyland. Fahr centipede needs no power at all. No problem. Jones baler is a little heavy on hills, But pto power is no problem. I reckon my 3545 would run A round baler (If I had one) The only thing I ever had problems...
  11. 3545 propshaft uj joints

    3545 propshaft uj joints

    The gearbox end. But The dealer kept the bloody Sticker from the box69) It was a "sparex" part anyways. Maybey I have the bill somewere it could be on that.
  12. Adding Aftermarket Front end Loader-question

    Adding Aftermarket Front end Loader-question

    The best way is to fit a spool-block with levers. one pipe from tractor tiping valve, and one pipe to return the (circulating) oil back to the gearbox. The lift capacity is basically what the front axle can hold (Around 800kilo i guess:-/) The mounting points are already there Like mathew...
  13. 3545 clutch probs HELP URGENTLY

    3545 clutch probs HELP URGENTLY

    Ehhh? I think you mean this the other way around??? The pto shaft is the thin shaft. The main gearbox drive is the big shaft. (I think:-x) I find the plate centre catches on the flywheel bolts If you put the long end first (So, put the long end to face away from the flywheel) The other plate...
  14. 3545 propshaft uj joints

    3545 propshaft uj joints

    Owww...... This is not easy:p Originaly they had a cv type joint on the ends. but they always broke off,So then they made anything they could find to fit. For example on one end of my propshaft I fitted cheap pto shaft joint (12) But on the other end I needed one specialy made Cost (90) I...
  15. 3045 COLD START BUTTON.

    3045 COLD START BUTTON.

    The button on My 3545 has a hole:( There is nothing wrong with drilling a hole, there is nothing to leak-out because the button is sealed. You dont even need a drill, the metal is soft so a little nail or chisel will make a hole.
  16. zetor crystal

    zetor crystal

    You can get them in good condition for only 1000-1500 (how many euro?) over here renze! Maybey you should buy them all:) I think non runner 2wd is worth maybey 300-350.
  17. 3045 COLD START BUTTON.

    3045 COLD START BUTTON.

    If you search the other side of the nut with a little nail (the type you hit with hammer;D) there should be a little hole to give the button some oil (you can also use the nail to push it out)
  18. proxima plus

    proxima plus

    Maybey zetor should fit hook lift on the 8441:-/ because 80hp tractor is used with 4 furrow plough,10ft discs ect.. and hook lift is needed for these. Have you had any problems with you proxima? i want to buy new zetor but the forterra looks a little heavy for me. maybey proxima is big...
  19. Tractor choice-NOT EASY

    Tractor choice-NOT EASY

    I have been looking around as well. But what i have seen is that the zetor has very high torque reserve (38% I think?) But Same explorer for example only has 22%!! This is what i find interesting;) To me zetor is much better designed tractor, it has twice the pulling power of other makes:)
  20. proxima plus

    proxima plus

    If you want hook lift linkage ends, ect.. buy the "forterra" version. it has the same hp but higher specification.;)
  21. ZTS UR IIC M98 >>Is this a good tractor???

    question ZTS UR IIC M98 >>Is this a good tractor???

    All the small Ursus have massey ferguson engine. (perkins) I dont know what engines are fitted in 100hp+ Ursus???
  22. tractor pulling

    tractor pulling

    There are many types of "cargo" trucks with 4 and 6 cylinder. The Ford cargo is still in production i think??? Anyway there was a "cargo" articulated truck made in small numbers and had a bigger engine, but I dont know the hp. I think 380hp in fordson major is a bit much, it...
  23. I

    solved Looks like we've stopped the garbage postings !!

    Renze, there was a "welcome our newest member" notice yesterday called something like "loans4free":-/ But it seems they have failed to post messages.
  24. any help

    any help

    Not much. I guess maybey they could work???
  25. any help

    any help

    They are a few cm's smaller on the daihatsu. Wont fit:-/
  26. ZTS UR IIC M98 >>Is this a good tractor???

    question ZTS UR IIC M98 >>Is this a good tractor???

    Those forterra are OK. The new ones are better though. The ZTS is just the same as the old crystal, just the styling is new. underneath it is the same tractor;)
  27. any help

    any help

    Sorry, not had any time to check:-/ They look (from a distance) like they would fit. Will try to mesure them this weekend.
  28. ZTS UR IIC M98 >>Is this a good tractor???

    question ZTS UR IIC M98 >>Is this a good tractor???

    The ZTS has not changed much from the "crystal" range. So It is exellent pulling tractor. But the zetor forterra is a much more modern design And more fuel efficient. I guess if you want a strong and simple tractor the ZTS is better. But I would prefer The Forterra, because it is...
  29. CLUTCH REFIT

    CLUTCH REFIT

    You should put a little copper grease on the shaft (were the bearing slides) What is the problem you are having with the clutch?
  30. Teagle tomahawk 4040

    Teagle tomahawk 4040

    I thought it was:) Metal detectors are not that good unless they are connected to the electric box and "auto-stop" the forager. otherwise the metal has landed in the trailer before the alarm goes;D
Back
Top Bottom