• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. Zetor 6341 engine need work?

    Thanks Renze. Ive heard about the brake fluid trick and then put it to hard work. Its the middle of the winter here so my only option is to put a snowblower behind maybe. But what is my options for the future? I only do light work with the tractor, will the problem come back? What if I did a...
  2. Zetor 6341 engine need work?

    Hi I have a 2002 6341 with 4400 hours. It uses some oil and now it has started to leak oil everywhere. Its sweathing oil from dipstick, exhaust manifold, front cover etc.... Im guessing since it only sees light work its pressure in the engine due to pistions rings? What are my options to fix...
  3. question Upgrade from Zetor 7045 to what?

    Hi Contact Zdenek Nowak *email address deleted* He will help you out. It is easier and cheaper if you have done the research and have the partnumbers ready. //Tom
  4. 6341 problem.No brakes and no air. SOLVED!!

    Thanks! Does this valve sit besides the fuel tank? I will have to have a close look on where the brake fluid goes. I have a leak somewhere.
  5. 6341 problem.No brakes and no air. SOLVED!!

    Well now everything is fine :) As I said I added fluid but since I was alone I couldnt bleed the brakes. Today I got a friend to help me and we bleed only the rear brakes. Alot of air in the system. Now eveything works. Airpressure gauge is on the green and seems to be back to normal. SO if...
  6. 6341 problem.No brakes and no air. SOLVED!!

    Thanks for your input. Clutch works perfect. The fluid reservoir is split in two, only the one for the brakecircuit are empty. I cant see any leaks, my guess is that one of the rear brake cylinders are leaking iside the rear end. Is there a valve that gives air to the front air assisted...
  7. 6341 problem.No brakes and no air. SOLVED!!

    Hi Earlier this winter I got a problem with the brakes, the pedal got soft but brakes still worked. Last night the warning lights for low air came on. Pressure stopped just below the green on the gauge. So there was pressure but too low pressure. Today I refilled brake fluid, reservoir was...
  8. losing oil between pump and distibutor 6245

    Hi Email Dale Strong. He just did this procedure on his zetor. I belive he had to get the tool from zetor to flange the pipe in the tractor body. //Tom
  9. Operating PTO and lever for Pump/pto on 7045.

    Ok, seems I need to adjust the hand clutch. I doesnt work...
  10. Operating PTO and lever for Pump/pto on 7045.

    Hi What is the correct way to operate the PTO on my 7045? When I have the tractor running in neutral and with the clutch pedal down I cant find all 4 spots on the left lever on the floor. 1.pump 2.pump + ptp 3 neutral 4 pto When tractor is turned off the lever moves tru all 4 spots. When...
  11. question Cab rubber mats

    For which Zetor? They arnt that expensive to buy new. I bought new ones for my 7045.
  12. Vibration 6341

    Im aware of this. But you are wrong my friend :) My tractor has 23 cogs gear wheel, and yours have 22. So if I fit 16.9x34 rear tires I need 13.6x24 fronts.... 11.2x24 and 16.9x30 has 23 cogs gear wheel 12.4x24 and 16.9x34 has 22 cogs gear wheel
  13. Vibration 6341

    Thanks! I thopught something was seriously wrong. Front tires are ready for replacement soon. They are also the wrong size... 320/85-24. According to the registration documents fronts should be 11.2 x 24. //Tom
  14. Vibration 6341

    Hi I have a vibration problem on my zetor 6341. From 3rd gear and upp I have vibration on specific rpms... If I let off a little or give more throttle it almost goes away. I have just bought the tractor and I am in the process of doing a complete service. - engine oil/filter changed -...
  15. 8011 3-point linkage chain length?

    It all depends how your wheel settings are, narrow or wide. Maybe the arms can touch the tire if they are all the way narrow. I have never experienced it myself. But there is two springs that clips together when you have no implement on the arms. They hold the arms together. Atleast my 6341 has...
  16. 8011 3-point linkage chain length?

    Please explain what your after?
  17. Wanted drawing of the hydralic distributor block for 7245

    Ive just done this to my old 7045. I took off the seat and the cover for the inner and outer hydraulics. Then I removed the lower back window. Off with the floor where the gear levers are. Disconnect handbrake/pto clutch cabels from body. Then i removed the floor under the seat. Now you should...
  18. Wanted drawing of the hydralic distributor block for 7245

    There are some bad and blurry drawings in the parts manual. Have you seen them? I had issues with my distributor block, one of the valves inside got stuck sometimes. I ended up buying a new one because it was too unsure if a repair would be good enough. I think it was around 350 euros for the...
  19. 6341 transfer case

    Thank you for sharing info! This is what forums is all about. Even though you had to find out for yourself this could help someone else later :) Thank you sir! //Tom
  20. Tire size? Ratio between rear and front wheels?

    According to the spec sheet you should change gear wheel to 22 cogs. You have 23 today. But as long as it works why change :)
  21. Tire size? Ratio between rear and front wheels?

    Its a 40 km/h tractor so it already has radials all around. I contacted zetor to try and find out the factory ratio so I could calculate the exact overrun on the front axle. But they only replied this: "Gear ratio is fixed numbered teeth on the wheel in the cabinet front drive (23 or 22 teeth...
  22. 7245 Slow hydralics

    On the 7245 you should have hydraulic outlet quick couplers on the rear of the tractor. If you measure on the loader first and then the rear you will know if the pump is good. Even though you have changed alot of parts you could have an internal leak somewhere? Measure the pressure first.
  23. 7245 Slow hydralics

    Do you have any tractor shops nearby so you can borrow a tester to see what the hydraulic pressure is like? Like this: https://www.youtube.com/watch?v=TGyH7TDrdHQ
  24. Tire size? Ratio between rear and front wheels?

    Hi. Thank you for your input! :) Have you been using 4wd much? According to my calculations going to that size of tires wouldnt be adviceable. You raise the rear tire size more than the fronts. According to my calculations you should have even bigger front tires. Recommended is 13.6x24. This...
  25. Tire size? Ratio between rear and front wheels?

    So what you are saying is that I will be fine even though the ratio isn't perfect because 4wd should only be used on slippery surfaces? I can see the logic in that :)
  26. Tire size? Ratio between rear and front wheels?

    Here is a Swedish article on the subject. Maybe you can understand some of the charts. :) https://www.maskinisten.net/download/file.php?id=8925
  27. Tire size? Ratio between rear and front wheels?

    Yes Renze you Are correct. But there is science to this... If I know the ratio I can calculate how big front tires needs to be vs. rear tires. Front tires should run longer(faster) than the rear by 1-5%. Recommended around 3%. Does anyone know the difference inside the front/rear diffs from a...
  28. Tire size? Ratio between rear and front wheels?

    Hi My 6341 Super came from the factory with 11.2 x24 front wheels and 16.9 x 30 rear wheels. I do not know which type of tires it had new so I dont know the exact circumference for the factory fitted wheels. But lets say a 11.2x24 wheel have aprox. 3300mm circumference and 16.9x30 has 4400mm...
  29. question Just bought a Zetor 6341.Super ... Some questions?

    I took off the inspection hatch, but couldnt see anything obvius was wrong. But I dont really know what to look for either. Shot a video of what happens when I try to drive. https://www.youtube.com/watch?v=9OzFWEMz4ew I got it barely moving, but its like the clutch just barely engages. And I...
  30. question Just bought a Zetor 6341.Super ... Some questions?

    Ok Renze. Old zetor 7045 parked 6 months ago. I have done work to the hydraulic system. Changed pump, distributor, safety valve, overload valve etc. Work done, filled up With 28 liters of oil. Then I start the tractor and try to take off, but it wont move at all. So Im thinking either the...
Back
Top Bottom