• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Search results for query: *

  1. Zetor Proxima model 2011

    Zetor Proxima model 2011

    How is the shuttle drive and new transmission working on theise tractors? I red on some sight that the transmission in the forterra was a bitch? And how is the fuel usage on theise models compared to other tractors. my 9540 used 50 liters when I was cutting grass on it for a friend on a big...
  2. Zetor Proxima model 2011

    Zetor Proxima model 2011

    How are the proxima and forterra tractors working out? In Iceland they improted the last zetor in 1997/8 So we havent seen any of the new models in action. I am very found of zetor and have just started building up my mothers old farm so in the future I would rather stick to tradition and buy a...
  3. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    So do you think this would be a mistake to replace the master cylinder with a bigger one?
  4. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    thanks Renz Ill look into that. But this is what this company told me :http://shop.markomt.sk And the letter of response: Dear Mr. Brennan, I consulted your problem with our mechanic. If clutch plate is slightly warped, it is needed a higher stroke of work cylinder. Our mechanic fix it by...
  5. Zetor 9540 tie rod end

    Zetor 9540 tie rod end

    Just for information if any one has the same problem . The steering end from the shaft betveen the weels has the same inside parts as the steering end on the hydraulic steering jack
  6. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    Hi Doas any one own a workshop manual for zetor 9540? I would like to know how much the clutch slave cylinder should push out it goes out about 15 mm on my tractor but if it where to push fully out then it should go 25 mm I was andering if the wokshop manual says any thing about this?
  7. Zetor 9540 tie rod end

    Zetor 9540 tie rod end

    Do they by any chance have a online parts manual for Zetor 7011? looking for a lot of parts for that one to And thanks for the zetor 9540 manual it gott me closer to what I was searching for :)
  8. Zetor 9540 tie rod end

    Zetor 9540 tie rod end

    The dealers on Iceland say that these parts are not manufacture any more and are trieng to find a nother tie rod end wich has the same insides
  9. Zetor 9540 tie rod end

    Zetor 9540 tie rod end

    Greetings fellow zetor owners Im having trouble (yes more of it) with the tie rod end on the steering cylinder on my 9540 Its welded onto the shaft so I cant replace it, and the parts dealer here in Iceland cant seem to find the parts to change inside of it , are there any other tie rod ends...
  10. 8540 engine problem

    8540 engine problem

    Could it be the exhaust or air intake valves ? I remember my old Volvo had a similar problem and it turned out to be the valves but that was a Volvo so I dont know it is the same problem just a thought .
  11. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    Oh and to answer an old question No it doesnt seem to slip, it holds very well when ploughing or transferring heavy loads on a trailer .
  12. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    Thanks Mike Then what could the trouble be ? A mechanic told me to hold the clutch shaft out while some one released the master cylinder back , I did that and then slave pushed all the way out and getting it in gear was easy but It didnt go as much back so it was always applying pressure to the...
  13. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    I just put the tractor inside the garage yesterday and when checking the clutch slave I noticed that it has never pushed all the way out, there was about 5 mm missing and have from the beginning since in that area there was rust and dirt, I noticed that the master cylinder for the clutch on the...
  14. Any idea where I could find a worksjop manual for ursus c-362???

    question Any idea where I could find a worksjop manual for ursus c-362???

    Id really like to get a workshop manul and a parts list for this tractor Im rebuilding it .I think its a awesome machine, I was told the headbolts on these tractors where to thin so the gasket would always crack bu my uncles drilled it out and put bigger ones so there was newer any problem with...
  15. ursus c-362 - parts?

    question ursus c-362 - parts?

    are youa parts dealer
  16. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    So its deffinetly has nothing to do with the new slave cylender they are the same ? well thanks then i have some clue on what to check on next but I have to split the tractor in half to see the if the drive plate has any oil on it, theres no other way to be shure about it is there?
  17. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    can it be cleaned or do i have to replace it?
  18. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    oil on the drive plate ?
  19. ursus c-362 - parts?

    question ursus c-362 - parts?

    Hi I own a ursus c-362 the engine broke they say that its the cylenders , i cant get any parts for this tractor in iceland but a friend of mine gave me two old ones, one c-350 and a c-360 I was wandering if any one here knows if the parts from these engines fit the c-362 ???? happy new year bye...
  20. Zetor 9540 clutch problems

    Zetor 9540 clutch problems

    Hi I own a zetor 9540 and have since 1998, about 8 years ago i staqrted having problems with the clutch , it wasent working well and i could hardly get it into gear, so i called the local dealer and they sayd that it was probably the slave cylender so they sent me a new one, but the new one was...
  21. Zetor Forterra

    Zetor Forterra

    Im working for a company in Iceland wich supplies farmers with what they need and we also own the bigest slougther house on Iceland and we are the importers for gallagher fence systems on Iceland and we are thinking about importing Zetor to Iceland again seeing as the dealer here doasent have...
  22. How are the Proxima, Proxima plus and the zetor track lifter??

    How are the Proxima, Proxima plus and the zetor track lifter??

    what do you meen if they arent broken in yet???
  23. Zetor Forterra

    Zetor Forterra

    Hello again. Can any one tell me the differents betveen the proxima plus and the forterra, doas the forterra have any computer or some nonfarmfixable items or is it an farmmantance machine like the proxima?? Is it in general a good tractor or even better than the other models?
  24. How are the Proxima, Proxima plus and the zetor track lifter??

    How are the Proxima, Proxima plus and the zetor track lifter??

    How are the Zetor engines working compared to simular engines? and how is the gear shifth compared to other tractors ? is it rough ??
  25. How are the Proxima, Proxima plus and the zetor track lifter??

    How are the Proxima, Proxima plus and the zetor track lifter??

    Iment front loder. So they are more expensive comparing to other tractors then they were.?
  26. How are the Proxima, Proxima plus and the zetor track lifter??

    How are the Proxima, Proxima plus and the zetor track lifter??

    Hi How are the proxima, proxima plus and the zetor track lifter working out??? Would like to hear the good points and bad points if any one knows
  27. Valmet 6400 is it worth buying?

    Valmet 6400 is it worth buying?

    How are the Proxima Plus and the regulare Proxima working out? And does any one have any experience with the track lift the zetor is using??
  28. Valmet 6400 is it worth buying?

    Valmet 6400 is it worth buying?

    what tractors are the best tractors, for regular farming??
  29. Valmet 6400 is it worth buying?

    Valmet 6400 is it worth buying?

    And when I say oil I mean fuel (disel) I was told to buy rather the Valmet 900 series about 2000 model but it has a lot of electric systems and a computer I think????
  30. Valmet 6400 is it worth buying?

    Valmet 6400 is it worth buying?

    I was told that the front axel on the Valmet 6400 was to close to the center of the tractor so if you have a front loader with some weigth on them the tractor starts to lift its rear upp... and i was told the transmission wasent wery good and that the tractor used more oil becose of that?? does...
Back
Top Bottom