• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by roadpacker

  1. 3320 ignition switch wiring

    3320 ignition switch wiring

    This is an old thread and when I revisited it to refer back to the link for the wiring diagram it was no longer available. I would really appreciate it if someone could re- post the link to the diagram. Thanks Skip
  2. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    After a long break from putting the Zetor back together, I finally pulled the top off the gear case again, and installed the gaskets.Reinstalled the top and everything shifts and works like it should.I would like to thank everyone who offered advice and tips on my problem. I probably would not...
  3. 3320 ignition switch wiring

    3320 ignition switch wiring

    Thanks Mac, lust saw your reply and I do appreciate the diagram. It is much more clear than the Zetor manual.Should be a large help with my 3320 wiring.
  4. 3320 ignition switch wiring

    3320 ignition switch wiring

    I replaced the switch on the 3320 and I may not have connected it correctly. I have checked fuses and they are ok, but I still have no circuits working except the starting circuit, I put the key into the switch at the"0" position and hit the starter button and it starts up like it should, but no...
  5. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Thanks for the tip, I'll use instant gasket rather than teflon and anti seize. It will be a few days before I get back on the project.
  6. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Yes, I was able to fish the broken part of the lever out of the gearcase with a magnet.Took several tries, but eventually found it. You are correct about the gasket between the gearcase when I removed the gearcase cover and rear end breaking . I cut it off smooth and made another out of garlok...
  7. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Received my parts order yesterday from Ridgeway and installed the new PTO lever. I put the gearbox cover on with 4 bolts and no gasket and tried the lever and it worked smoothly. Started the tractor and now have hydraulics and pto working normal.I will remove the gearbox cover and install the...
  8. Lilliston Rotary Cutter

    Lilliston Rotary Cutter

    I have a four foot drag type Lilliston mower that is built like a tank. It seems to be a strong mower, but I know nothing about it, other than it is no longer in production. Does anyone have one and have any information on a source of parts? The gear box is built different than most cutters like...
  9. 3320 hydraulic/pto lever won't switch positions

    3320 hydraulic/pto lever won't switch positions

    Have you made any progress on the repair job?
  10. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    With the lever stuck in PTO only, does the pto shaft turn as it should? If it works and you can't select any other positions, you may have the same issue I have - a broken PTO lever.
  11. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Pulled the gearbox cover today, and found what I suspected-PTO lever sheared off from the shifting lever. Broken piece had dropped to bottom of gearbox, and after much fishing with a magnet was able to hook and hold it for extraction from case. How lucky was that! I will order parts Monday and...
  12. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Excellent advice, Renze. Spoken like my old first sergeant who lead by example. " No guts-no glory" I'll dive into it and getter done. I just have to be smarter than the machine and follow the three rules of equipment repair. (1) Don't fix anything that ain't broke. (2) Don't replace any parts...
  13. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Thanks for the good information on a parts source. Ridgeway seems to have most of the parts that I think I need. I still have not pulled the gearbox cover off, as I got a repair manual and have been studying it to be sure that I do it correctly. The manual does give a good illustration of the...
  14. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Thank you Renze. I really do appreciate all the information that you guys have shared with me. I don't think I would have had the courage to tackle the job without ya'lls help. Are you talking about removing the detent bolts on the top of the cover before going back with it? I now need to start...
  15. 3320 PTO and Three Point Lift Problems

    3320 PTO and Three Point Lift Problems

    Mike, you were totally correct about the weld being broke on the PTO shifting lever. I removed the small bolt that retains the lever in the gearbox cover and was able to remove the lever without taking the gearbox cover off. The weld was sheared off smooth with the lever.I now have to remove the...
See more
Back
Top Bottom