• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by paddy

  1. Serial Number 4718

    Hi, thanks for all your replys. Found it any way located no the back axle housing and had it confirmed by my local main dealer. T.bolster for your help. Any one no where there is a 7011 or 8011 for sale fairly low price ;-);-)wanting a bit of work? Im located in south west Ireland but will travel!
  2. Serial Number 4718

    Hi there, where will i find the chassis number on my zetor 4718 apart from on the plate. is it on the axle someplace? thanks paddy
  3. Pulling power!!!

    Thanks. Wanted to make sure
  4. Pulling power!!!

    Just wondering would my 4718 pull 5 tonne trailer?
  5. Removing liners 4718

    oh thanks thought it would make a difference alright. Just while i think of it iv a brand new alternator ang the charge light wont go out? but it is chargin the battery Any ideas to what causes this? thanks again.
  6. starting

    When I rewired my 4718 any ignition wire with a join seemed to give trouble regadless of how good the join seemed to be. Might just be someting to keep in mind.
  7. Removing liners 4718

    amazingly not much. around the inside of the block itself there was a good bit. had awfull trouble pulling the o rings past the top hole. The new liners were a nice bit tighter than the old ones but as far as im aware thats normal. found a broken ring in cylinder #1. It was broke in to three...
  8. Removing liners 4718

    Thanks again for the reply. Have the liners knocked out and was plesently suprised how well it went. do the seals just pul up past the top hole in the Block of do you have to remove the seals first?
  9. Removing liners 4718

    Hi, Thanks for the reply. is it ok to knock the liners out this way or would i be risking the block? thanks Paddy.
  10. Removing liners 4718

    Hi Lads, ok so iv biten the bullet bought 3 pistons and liner kits and there on the bench. just wondering how difficult is it to remove the liners from the block? Thanks in advance Paddy.
  11. ye might find this interesting

    Hi There , Just thought I'd let ye no I've updated these pics of my zetor 4718! You might be interested to see. She's nearly finished now and have to sort the windows and tyres! then Unfortunately she has to go :( cos i've my eye set on a bigger zetor!!:D anyway take a look an let me no what ye...
  12. remove the fuel tank on a 4718

    Thanks very much. just making sure i wasnt missing anything obvious. Thank you Paddy
  13. remove the fuel tank on a 4718

    Hi there. I am having trouble removing the fuel tank on my 4718. Do i have to raise the cab. I have the mounts and the pipes removed. Thanks in advance. Paddy
  14. Am I looking at an Engine rebuild???

    Hi just finished college so it time to get this finished!!!!......I filled the injector pump with oil an when i drained it off it was white oil that came out! What would this be is it just condensation or is it a bigger problem? Thanks Paddy
  15. ye might find this interesting

    I know this is not strictly about Zetors but ye might find it interesting. www.mytractorstuff.webs.com I made this up simply to keep my photo records safe lost loads of photos because of computer issues. Iv a 4718 being restored on here. Feel free to take down this post if it goes against forum...
Back
Top Bottom