• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by micd

  1. need help to diagnose problem with 5245 transmission

    need help to diagnose problem with 5245 transmission

    Thanks Guys I will do the tests you recommend and report back. Cheers Michael
  2. need help to diagnose problem with 5245 transmission

    need help to diagnose problem with 5245 transmission

    Hi Gav, thanks for getting back to me. I hadn't thought of the clutch because it will still stall the tractor and the fault is a very quick off and on of power, but I thought (most llikely mistakenly!) that a clutch slip would take up a bit more gradually. You might be right. I will try it on...
  3. need help to diagnose problem with 5245 transmission

    need help to diagnose problem with 5245 transmission

    I welded a steel shelter for the tractor in the shape of a scale version of the great pyramid of Cheops. I parked the tractor under it and all of the problems have now stopped, the clutch is good, the transmission is good and the oil levels have filled to the full level, I haven't even needed...
  4. need help to diagnose problem with 5245 transmission

    need help to diagnose problem with 5245 transmission

    I have a new and seems to be increasing problem with our pony club 5245. This I notice especially obvious when on the road going up a hill. The transmission seems to 'hiccup'. I mean there is a very quick slippage somewhere but then immediately takes up again and goes fine for 30-40 secs...
  5. 5245 gear grinding problem

    5245 gear grinding problem

    I had a bit of a test of something and it seems to help. When I bring the tractor to a halt, I release the clutch a little til the engine just labours a little while I hold the brakes on then press the clutch completely. Nine times out of ten then there is no grinding. If I am right in my...
  6. 5245 gear grinding problem

    5245 gear grinding problem

    Hope somebody is reading this! I went out to the tractor again this afternoon and tried a few things. I undid the adjustment nuts on the transmission brake lever so the pull rod was free to move, then I went under the tractor and moved the arm at the back of the pullrod at the back of the...
  7. 5245 gear grinding problem

    5245 gear grinding problem

    As I said in the last post, the transmission brake lever moves when the adjustment nuts are loosened off, but I forgot to say that the direction of travel is forward, so it should pull on the rod that runs to the back of the transmission. That rod is mounted to a small arm at the back. I am...
  8. 5245 gear grinding problem

    5245 gear grinding problem

    Hi everyone, haven't been around lately, you might remember we had our tractor flooded back in January but I got it back and running good. We just had to redo the alternator and replace the starter motor from the water damage. but anyway that's not the problem. I want to fix the grinding...
  9. wires to the fuel sensor 5245

    wires to the fuel sensor 5245

    somebody, anybody??? please?
  10. Wiring Diagrams for 5911

    Wiring Diagrams for 5911

    My new users manual for 5211 6211 7211 etc had a loose leaf with the wiring diagram on it. Cheers Michael
  11. wires to the fuel sensor 5245

    wires to the fuel sensor 5245

    Could someone tell me the placement of the green, blue and brown wires on the fuel sensor please? Perhaps the clockwise order of the colour from the horizontal pin will make it clear. At the moment it's reading full, no wires are connected. When I put the green on the horizontal pin it...
  12. our 5245 has been under water, I need some help

    our 5245 has been under water, I need some help

    Hi Mike, the tractor doesn't labour in 2 and everything works well, reassuring to know I can lock it in position 2. New problem. Can someone tell me the position of the blue, brown and green wires on the fuel level sensor? There are two vertical pins and one horizontal pin in a triangular...
  13. our 5245 has been under water, I need some help

    our 5245 has been under water, I need some help

    Thanks Mike, I just hear the pump constantly pumping but not anything I could describe as a bad sound. I don't think I would know what the relief valve popping would sound like though Cheers Michael:):)
  14. our 5245 has been under water, I need some help

    our 5245 has been under water, I need some help

    Oh Dear I have more questions sorry{:-( The front loader on the tractor has its own control levers mounted about head height and an arms length out to the right of the driving position. The way it's setup, the system works when the outer circuit quadrant arm is locked in the 2 position with...
  15. our 5245 has been under water, I need some help

    our 5245 has been under water, I need some help

    Thank you:) Cheers Michael
See more
Back
Top Bottom