• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by gunnnar7211

  1. 3 point hitch - drooping

    3 point hitch - drooping

    hi Donny2stroke is rhigt internal ram take out cab rear wall take off the seat plate. then you take off the hydraulik lid this iss werry hevy use some ting to lift itt whit
  2. just bought a 6245 have questions

    just bought a 6245 have questions

    hi the pto selektor is for pto only you can drive your pto true the gear boks and get 5 diferent speeds on it the lever all the wway to right is for the travelling speeds all the way down is low speeds for driving off road all the way upp is hi speeds for driving on the road hope this helps
  3. zetor with hydrulic problems

    zetor with hydrulic problems

    hi in front off the levers for the hyd controls there is a valve thats controls the liftspeed it may be closed sorry for bad english
  4. 6711 blowing out the air intake pipe

    6711 blowing out the air intake pipe

    hi the lihgt work ! they gett sott bildup on the valve stems take off heads, take out the valves give them a clenupwiht some abraisiw cloth and reasambel ,this engins neds tho workt hard now and then to avoid this.
  5. 7745 BRAKES

    7745 BRAKES

    the eqkvaliser is in the system to make the brakse strait if you have a bit diferent pedal presure it kompensaits that. it a tube with a disk and some sprigs inside cant see howe it could hold bak fluid
  6. PTO lever-live hydraulics --5211

    PTO lever-live hydraulics --5211

    pto setings are all the way forward only hydrolic one clic back pto and hydrolic one clic more is nutral noting working one clic more pto tru the gaerboks ie five speds when hi/lo is in nutral. pull pto cluthc to cange setting lever nekst to handbrake pointing bakwards. your hyrolic shukd work...
  7. Starting a 5211

    Starting a 5211

    hi on the 5211 the cold start is automatic ie full trotell hold starter button until it starts reduse to tikover there is no sort off low plugs or other cldstart aid iff you have trobel starting after iit have been sitting for a day there is probebly getting air in to the system comon foult use...
  8. 5211 brakes

    5211 brakes

    hi i tink they are self adjusting onlyway in to brakes is by removing halvshaft if they drag they most probebly is seisingupp at pivot bolts to rektyfi this you ned to pull it apart
  9. 6245 help with oils

    6245 help with oils

    [No message]
  10. 6245 help with oils

    6245 help with oils

    hi agian yes thats the bleeder valvs or the brake system
  11. Zetor 7211 Block

    Zetor 7211 Block

    hi same number on the block itself 6901 diesel injektors and pump is diferent dont know if gaer housing is the same
  12. 7211 steering pulling to right

    7211 steering pulling to right

    it sounds like your asistor ram is out off adjustment here is a post in here sommwere
  13. 5211 hydraulic fluid change

    5211 hydraulic fluid change

    yes it normal whit metalshaving at magnet if not morethan 300 houers its from the braekinn off gears use a uinversal oil in it or the hydrolikk will get slow when it gets cold
  14. 6245 help with oils

    6245 help with oils

    hi yes same oil in air filter as in engine
  15. 6245 help with oils

    6245 help with oils

    hi agian yes spot on
See more
Back
Top Bottom