• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by doberstaffie

  1. 7045 fuel pump bleed screw

    7045 fuel pump bleed screw

    cheers buddy, thanks for the tip! ;)
  2. 7045 fuel pump bleed screw

    7045 fuel pump bleed screw

    Hi I have just changed the perished fuel pipes on my 7045, I started bleeding the system and got the bleed screw above the fuel filters ok, but I cannot see a bleed screw on the fuel pump? Does it have one or do i go straight to bleeding the injector pipes? thanks!
  3. new tractor

    new tractor

    I was in the same situation. Had a Ford 4000 and although it could pull the trailer on the road, it barely managed if it was slippy or through a field. I managed to trade my 4000 for a Zetor 7045. It's 4wd and about 65 Hp. Plenty of power for moving my tralier full of manure. The cab is large...
  4. Starting problem.

    Starting problem.

    thanks for the tips guys, but it's new so no need to strip it down, will just ask for a replacement.
  5. Starting problem.

    Starting problem.

    yeah it seems that way, I got it from Motocheck so will ask Erik to send another one. Cheers Ricc
  6. Starting problem.

    Starting problem.

    ok removed the wire but it still kept turning over, so put my old solenoid in as I thought it would be ok as I had to renew battery. But the original problem came back with the clicking. So I am going back out to replace the solenid with the new one. Any other ideas of what is wrong with this thing.
  7. Starting problem.

    Starting problem.

    thanks Ricc! Will give it a try now!
  8. Starting problem.

    Starting problem.

    Problem now is my tractor wont stop starting! as soon as I turn on the power switch inside the cab, the starter starts turning over and does not stop, even without the key in or the clutch pressed, it keeps turning over, the engine started and it did not dis-engage even when the engine is...
  9. Starting problem.

    Starting problem.

    will do, charged the battery for 2 days but will try with the jump leads.
  10. Starting problem.

    Starting problem.

    the battery is fully loaded and the clutch is all the way in, so I guess it is either the clutch switch or the solenoid. I will try you suggestion later when I get home and see if I can bypass the clutch switch.
  11. Starting problem.

    Starting problem.

    Does anyone know why my 1982 7045 won't start? When I press the start button all I get is a large click sound as if a contact is made then broken immediately. I can't really find where the click is coming from but I fear it may be the solenoid? Anyone have any suggestions what to check?
  12. How to check gearbox oil level on a 8011

    How to check gearbox oil level on a 8011

    this company will send you out the manuals in two days. The written English in the manuals is very poor but it will give you an idea of where everything is. https://zetorworld.com/index.php?faq/paperware/
  13. Engine Heater seems to have killed the electrics.

    Engine Heater seems to have killed the electrics.

    ok it was not the core plug heater that caused it but there seems to be something with the ignition lock in my 82 7045. I think the key barrel is faulty or sticking as sometimes it makes the contact and then it does not. Leave it for a while and then the lights come on and it works again. Its...
  14. Engine Heater seems to have killed the electrics.

    Engine Heater seems to have killed the electrics.

    I plugged in the engine heater to see if it works and try help it start, but it's killed it. There is nothing from the key when you put them in, nothing no lights etc. The fuses are all ok. Any ideas?
  15. Hydraulic power lift lever and road speed selector levers. 7045.

    Hydraulic power lift lever and road speed selector levers. 7045.

    This was very easy to fix, 20 mins to get the floor out and 30 scents for two high tensile strength bolts to hold the levers in place. 10 mins to build back up. It would be good if we could add pictures to this forum. :p
See more
Back
Top Bottom