• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Recent content by chris_lockwood

  1. C

    long 900

    Hi, Congratulations on your purchase. It sounds like my 5748. Are you going to restore it/does it need restoring? Best Regards Chris
  2. Zetor 5211 won't move

    question Zetor 5211 won't move

    Hi, I had a problem so that once you've put it in gear and let your foot of the clutch nothing happens, this was due to the High / Low ratioas being in 'nothing' (they were previously jammed, we tried to free them and it seems we free'd them into 'neutral'). We took the relevent 'bolt' (I'm...
  3. Zetor 5748 or similar model dipstick length...

    Zetor 5748 or similar model dipstick length...

    Hi all, It turns out my dipstick length is as it should be. My concerns came from when we went to top iit up with oil, we put a lot in and it didnt show on the dipstick and we thought there was already a lot in there and we didn't want to over fill it. Many thanks to john, it is 95mm :) We foud...
  4. Zetor 4718

    Zetor 4718

    Hi, I'm still waiting for a bill from Gibbings..... Best Regards Chris
  5. Zetor 5748

    Zetor 5748

    Hi, I have added another picture took 2nd August: http://www.farmphoto.com/photography/message.asp?dsply=all&mid=104922&gkp= Best Regards Chris
  6. Big Orn, be my guest !!

    Big Orn, be my guest !!

    Hi, We call an adjustable wrench a monkey wrench and a bush hog either a topper, grass cutter or slasher depending on type. Chris
  7. Zetor 5748 or similar model dipstick length...

    Zetor 5748 or similar model dipstick length...

    Hi, Please could someone with a 5718/48 or a model with the same sump and block please measure the lenth of the engine dipstick from the bottom of the screw thread to the end of the stick. I need to see if my one is right...??? Many Thanks Chris
  8. Zetor 3011 for breaking!

    Zetor 3011 for breaking!

    Hi, A man near me has a Zetor 3011 that he is going to scrap at the end of this week. It has no electrics, or engine, it is just the back half. Is there anyone interested in any parts before it gets crushed? Best Regards Chris
  9. Zetor 4718

    Zetor 4718

    Hi Alf, I've just recived many spares for my 5748 from Gibbings & Sons, Zetor breakers. They seem a strange company to deal with and rather slow. We have not yet been billed, or even quoted for that matter, and we have recieved the parts ??? (though theyre good quality parts;)) Just be wary...
  10. New Zetor Super 50 for sale !!!

    New Zetor Super 50 for sale !!!

    shame we cant get them in the UK.........{:-(
  11. Zetor 5748

    Zetor 5748

    Hi Renze, Thank you very much, I will spray it gold. Thanks Again Chris
  12. Zetor 5748

    Zetor 5748

    Hi, Please could someone tell me what colour the dash board / instrument surround should be? should it be Gold-Beige or Polished metal? Best Regards Chris
  13. Transport box/rear box

    Transport box/rear box

    Hi, Does anyone have one of these for sale in UK that they could deliver to Suffolk? Most things a reasonable price considered. Best regards Chris
  14. Zetor 5748

    Zetor 5748

    Hi Renze, Yes, my grandad and uncle say the the flange section is off of a Sankey (as on Fordson Majors). This has been welded to a new hub to fit the zetor axels. I am currently pauinting the wheels and we have ordered all the parts needed for it. This came to 300. I hope to have it running in...
  15. Zetor paint colors?

    question Zetor paint colors?

    Hi, I have a 1974 5748, I have bought some Zetor orange/red and i'm, now stuck with the gold-beige. Is this metallic or is it just gloss finish? Would the normal paint be suitable? Best regards Thanks in advance Chris
See more
Back
Top Bottom