Search results for query: *

see what you can do with this. http://www.farmphoto.com/thread.aspx?mid=1041539 taken from old thread

http://www.farmphoto.com/thread.aspx?mid=1041539 taken from old thread

Looks like one whoure of a job. I was hoping there was some adjustment that could be made without taking the whole hub off :S.

Drum.

Hey Guys, I know there is a similar thread further down but It doesn't give much information and I'm not very mechanically inclined. The RH break on my 3320 is seized. (The LH break doesn't work). Going in reverse does not fix the problem as it had recently. I have the 3ph control box off for...

perfect, thanks!

Hey guys, I'm going to need to change the coolant in my 3320. Not sure if regular prestone would do the trick http://www.canadiantire.ca/en/pdp/prestone-long-life-concentrate-antifreeze-coolant-0293020p.html#srp or do I need to use the 'diesel formulated' coolant...

Hey all, Got a zetor 3320 equipped with an allied 394 loader. Was working the firewood pile and was wondering if equipped with forks, could the loader move around skids of firewood (half cord, sugar maple, 2700 lbs give or take). Thanks.

It has a single canister filter. It's an early model 3320.

Hey, I'm new to diesels so bare with me. I recently fired up my 3320 after sitting for most of the winter. It primed and fired up fine but stalled after 3 mins or so. Each re-prime and start up produced the same result. I figure there must be crud in the fuel filter/ fuel system? or possibly a...

I've got an early model 3320; Anyone know the size of the frost plug-style block heater? Other then that, is there anything else that would help on a very cold start-up? thanks.

I've got a 3320 with a bad solenoid. Is it possible to remove the solenoid without removing the starter? Thanks

Hey everyone, So I just purchased a used 3320 with allied loader, going through a complete fluid change. As for the hydraulic / trans fluid, I've read many cases that 80w-90 should be used and others where TDH is used. It was recommended that I use 80W-90 but my fear is that as I will be using...

...Turns out I had a chewed wire.

Hey guys, Bear with me. I've read all the previous forms about the charging issues. My problem is I can't seem to get power to my 'idiot' light. It should be coming straight from the ignition (before starting) correct? Even if there is a problem in the circuit further down I should still be able...

After further inspection, it seems that a contact has broken off the element. Any tips when swapping out the element? I have a loader so space will be limited. thanks

Hi, Not that it matters, but I'm curious as to the model year of the used 3320 I've recently purchased. Seems that the serial Number is 001339. Is there any indication of the year on the number plate? This is my first tractor so I'm sure to have many more questions. Thanks in advance.

Hi, I just purchased a used zetor 3320... not sure of the year.. 95/96 maybe? I was looking at the block heater and it looks like there are only two contacts on the 'heater element' coming out of the block but there seem to be three contacts on the power cord that plug into the element. Is...