Search results for query: *

I wont buy any new tractor without full service and repair information. If they dont release that information to buyer, i wont buy at all. Here service people comes from 30km nearest, but it can be 100km allso. When you pay their km money, service cost 100e/hour and they just clean some fucking...

Forterra HSX range tractor should have 120l/min load sensing hydraulics, not fixed capacity continuous flow 80l/min :-/ It is now with missing 50km/h gearbox option only bigger need....

There is 3 different solutions. Power assistant steering, and 2 type hydraulic steering solutions. Another hydraulic system has orbitrol at front of the tractor. Another has orbitrol under steering valve. But i dont know did zetor ever built version where orbitrol is under steering wheel. And if...

I will send some when i get time. I allready found some intrasting pictures. I must scan and turn them pdf....

After reading sparepart book and after watching pictures my quess is that it is standard cab, but it has finnish made roof panels and ventikation unit. Allso first chrystal models had here finnish made roof and ventilation unit. I quess factory copied then that system to their serial products in...

The picture is from finnish dealer brochure (kesko). It is 5011 from begin 80s. Next came cab with round work lights on top. Update was at 1984 or 1985. We had first one with new cab model in finland. The work safety office did do their noice measure and safety inspections to our tractor and...

Zetor-5011, That looks production model for me ;) We had one 6045 model wich had similar cab. We did changed it to new 6045 with new model cab after half year.

Its calsium chloride. When doing mix pour calsium chloride in the water and mix, dont pour water in calsium chloride ;) Tires filles 75% with mix. Mix scale is 0,42 kg CaCl / 1 litre water. Freezing point -47 degrees. Thats the local recipe. Glycol works fine too, you could maybe use old...

How much driven? Its not usual that pto lever jump off. 550/1000 selecting lever can jump sometimes. I was wondering, it can be worn claw clutch in the differential housing. It takes some time and work to change it ??? But that clew clutch wear end maybe at 8000 hours..... If its 3000 hours...

Per Olav, Im fighting with the same problem :-( There is possible to fit another pump to side of gearbox, but havent seen any. Originally it has own oil tank, but you could easily modify it take oil from gearbox. Then you can joint these 2 flow to one 90l capacity for external hydraulics...

I have 8000hours driven ZTS 14245. No problems with gearbox. Just torque multiplicator brake band is changed. Now it will get its 3rd hydraulic pump, but we use lots of hydraulics. Clutch is rebuilt, then we had to change clutch shaft too because. Very strong tractor. Some drivers are...

Clutch shaft i quess. Splines are worn off, and it jump over sometimes. Put heavy loaded trailer behind it and you see soon if its clutch shaft. This cause gear connecting problem too.

with 2 axle tandem trailer: 24 tn total weight and 4 tn drawbar weight + 50km/hour is standard here for that range tractor. Bigger trailers are 3 axle ones, and those are pulled with 230+ hp tractors. What i like about maxterra protos: Them seemes to be liable old good technology without...

Oh, btw.... I havent studied subject yeat, but.... If new system is developed because this: When you mount heavy reversible plough to ur1 series tractor... you cant use draft control or mixed, because lifting up and raising down the plough at headlands doesnt work "properly controlled" then. I...

They had also system where injection pump had pilot line to hitch control. If ploughing took too much power, it did raise a plough a bit. Proto was made on UR3 if i remember right. Anyway, i havent heard about it nowdays....

235 profi need least 140hp. I have 14245 tuned up to 180 hp and it can pull the baler when 60 to 70 cm high grass is swatched from 6.5 meter wide to one big swatch. Im going to joint my elho wrapper behind as a train, and just looking for JD7810 or case mxm190 to survive at fields with steep...

There have been a kit for another pump, mounted to rh side of the gearbox. But it has same flow capacity, so you should fit a valve that joint those 2 flow to one 80l/min. Then you need cool gearbox oil too. And I havent seen any that kind of pump fitted in scandinavian tractors. I recommend...

??? BTW... How this all joint to front loaders anyway? :)

Well then.... ... If you understand meaning of the work perkele, you understand 50% what finnish men are speaking. Few words more and you understand 80% what they are speaking ;D And you still wonder why it isnt important to understand finnish language ;) Only the rest 20% of the speak has...

Renze, There is difference between russian lanquage and finnish lanquage. Oh.. What it is? Its that you dont need to learn finnish, because you certainly dont want to know what finns are speaking ;D